Mts2000,i need free software for my motorola mts2000.

This type of radio can only be read out by someone with a software subscription and appropriate equipment. This could be an online or local Motorola dealer, a large company, or a municipality.

Best regards.

Your radio can be read out by an authorized Motorola dealer or by a company or municipality with a software subscription to that model of radio.

Best regards.

Your Motorola MTS2000 is not a scanner but a high-end two-way radio. It requires a computer, special interface box (called a RIB, for Radio Interface Box), the proper cable from the radio to the RIB, and the programming software called RSS (Radio Service Software.)

This is much more difficult than a scanner to program and if not done properly can cause the radio to automatically transmit on frequencies that you are not authorized to use.

Try calling your local Motorola dealer and ask them if they will program it for you for receiving only. They will either flatly refuse or they will be happy to charge you a service fee. Some places are more willing than others.

The MTS2000 shares software with the MCS, software package # RVN4176N includes DOS software RVN4097 for the MT2000. (It may be on the same CD, not sure.) You will need to use a "slower" computer, era 1999-2003 to program, due to speed issues.

Disclaimer: Motorola software is proprietary and only offered by Motorola to authorized dealers and entities.

First you need to be running DOS to do this. Next when you load the software press and hold shift when you use the numbers for the freq's.

The MTS2000 is a dealer programmable radio, there is no way to know what is in channel 4. You would need to have the radio read-out by a dealer, the print-out from the original programming or know who the dealer was and call them.

u can send to me gm 3188 r.09,and i will send to u mts2000 ok<[email protected]>

Please let me know the email address to contact you.

Hi,

Yes, but depends on the configuration/setup and programming/frequency assignation of the MTS2000.

To my knowledge, the UHF version of the Motorola MTS2000 are designed to operate either in the 403~470Mhz or the 450~512 or 520MHz band.

On the other hand, Motorola TalkAbout Radio are design limited to operate in the FRS band which is 462.5625~462.7250MHZ and/or the GMRS band which is 462.550~467.725.

So technically, both the MTS2000 and the FRS/GMRS share some frequencies. What needs to be done is to re-program the frequency allocation of the MTS2000 into its channels to match the TalkAbouts frequencies. The other way around is not possible. TalkAbouts frequency assignments can not be reprogrammed/changed. Below are typical TalkAbout Channels/Frequencies.

Hope this be of help/idea. Pls post back how things turned up or should you need additional information.

Good luck and kind regards.

Why buy a radio you cant program? I suggest you google for Motorola authorized radio shops in your area. Unless you have the software and equipment to do it, you won't be able to. You will also need letters of authorization for any channels you wish to have programed for transmit. If your a HAM or GMRS user be sure to bring a copy of your licence.