Hi I havelost my manual for the easyshare C875. Can you tell me how i transfer from internal memory to SD card please. I have also losst my cable and cannot do it via the pc Many thanks Sue

Do you have the optional sd memory card instaleld in the camera?


Have you formated the sd memory card or MMC card as suggested on page 37 of the user manual.
on page 36 on image storage settings = If set on Auto it uses the external card if there is one installed rather than the internal memory.

You need to have a memory card installed in the camera !
see page 5 of the user manual.
http://resources.kodak.com/support/pdf/en/manuals/urg00594/C875_GLB_en.pdf

Transfer the pictures out of internal memory using Easyshare software and USB cable. http://resources.kodak.com/support/shtml/en/manuals/urg00132/urg00132c8s1.shtml#BABCHAIG

The C875 works with MMC and SD cards. MMC cards are going obsolete, so you'll probably not be able to find many of them. When getting an SD card, make sure it's not an SDHC card. SD cards top out at 2GB while SDHC cards start at 4GB and go up from there. SDHC cards will not work in the C875.

Hi,

Go into the camera's menu and transfer the contents from the internal memory to the SD card. the camera has a card inside it with limited memory which is seperate from the SD card.




Regards.

The C875 works with SD cards, not SDHC cards. While SDHC cards will fit into the slot, they are electronically incompatible and won't work. You need to go with SD cards, 2GB and smaller.

Hi,

I am sorry to say that the C875 is not compatible with SDHC cards. Only SD or MMC cards.
You can get SD cards up to 2GB.

This is not unusual in cameras of a few years old.

Hope this helps.

make sure that the internal memory is sets on Auto, for you to check that first...

-Press menu button and look for setup then press Ok button
-Under setup look for IMAGE STORAGE it should be on auto if its Internal memory you need to select the image storage press ok button the select Auto then press Ok button again.

-make sure the Memory card that you are using is just 1GB or 2GB SD card only do not go over than that because it will not be compatible on the camera C875

GudluCK!

Plug your camera into your computer. You will have two removable drives. One for the internal memory of your camera as well as the memory card. If you press My computer in Windows you will see two removeable drive devices.

1. Ensure memory card is inside camera.

1. Turn on camera.

2. Press Review button on back of camera

3. Then Press Menu Button on back of camera

4. Select "Image Storage" option (by depressing the joystick on RHS of back of camera).

5. Select "Internal Memory" option (by depressing the joystick on RHS).

6. Select "Continue"

7. Press Menu button.

8. Press "Review" button

9. Press "Review" button again.

10. Press "Menu" button.

11. Scroll down to "Copy" and select this option by depressing the joystick.

12. Scroll down to "All", then select by depressing the joystick.

13. Contents should now copy over from internal memory to SD card.

14. Don't forget to reselect Auto detection of SD card afterward. This is done by turning camera off then back on again. Press "Review". Press "Menu". Select "Image Storage". Select "Auto". Select "Continue".

Try re-installing the driver software. Ensure that all the electrical contacts on the camera, cables and dock are clean and free from obstruction. If all else fails, USB card readers are cheap, and handy for other things. This is what I use.