Question about Sewing Machines

1 Answer

I have a Necchi 3205FA ROYAL series sewing machine. It will not sew at all the only time the needle moves is when I click the bobbin in and then it only moves for a second then stops completely.Should

Borrowed the machine from a friend she had it stored outside for how long I do not know.

Posted by Anonymous on

Ad

1 Answer

Linda M

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 15 Answers

Can you turn the handwheel manually? Does it move freely? If not, the machine needs to be oiled. Check the manual for the proper oiling locations. Basically, any metal to metal areas require oil. Just make sure the machine is unplugged and avoid oiling the motor.

Posted on Oct 14, 2014

Ad

3 Related Answers

ken dourof

  • 980 Answers

SOURCE: I have a Necchi Royal Series 3205FA. I wanted to

If you have a stop motion dial with little grooves all the way round the best way is to get a wide plade screwdriver, put the plade part on one of the grooves on the left hand side of the dial and give it a thump on top with your hand, that usually does the trick.

Posted on Mar 07, 2010

Ad

SOURCE: the needle jams when i start sewing

Could be threaded wrong - check manual for proper threading
Needle could be bent - check and replace if needed
Needle plate could be damaged - see if any burrs are on it if so take to service dealer and have removed
Bobbin could be wound wrong - check manual
Bobbin could be bent - if so replace.

Posted on Jul 29, 2010

Rand Scott

  • 1 Answer

SOURCE: My Nechhi Royal Series Sewing Machine Has stopped working

this site is useless! I ask about a sewing machine and coffee makers come up wtfo?

Posted on May 30, 2013

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Necchi heavy duty royal series. Manuel says 3205FA and 3204FB. I want to know where to oil it. I also need help because it won't reverse anymore. Any advice?


It's an old metal mechanical machine, right? It is probably seizing due to old oil that has dried. Here's my method for "unfreezing" old sewing machines. (You won't believe how good it sounds and how nicely it runs after you've give it some TLC!)


Wheel on right side that controls the needle up and down is very tight...

Jul 04, 2018 | Necchi Sewing Machines

1 Answer

How to thread a Necchi 3205 FA royal series


Search for:

Make Model threading
or
Make Model manual

https://www.sewingpartsonline.com/instruction-manual-necchi-3205fa-sewing-machine.aspx


Even if not your particular model, basic machine threading is very similar from one to another. Just be sure to ALWAYS RAISE the presser foot when threading the top thread---and change the needle often.

How do thread Necchi Royal Series Model 3205 sewing discussion topic...

How to Thread Necchi Sewing Machine

How to thread Necchi model 535 FA sewing machine now with captions

Nov 06, 2017 | Sewing Machines

1 Answer

Ned a diagram (or detailed instructions) on to thread a Necchi 3205FA & installing the bobbin. Thanks.


try www.sewusa.com there are threading diagrams for some Necchi models. even if yours isnt there the bobbin should be similar.

Sep 20, 2011 | Necchi 3101 Mechanical Sewing Machine

1 Answer

I have a Necchi 3205 Royal series machine. I was sewing denim and it jambed and bent the needle. I replaced the needle and now it won't pull the bobbin thread up. I have tried several different needles...


Hi, I've got a necchi sewing machine too, not the same model as yours.
you said you were sewing denim & the machine jamed & bent the needle, it's sounds like the machine is out of time, sometime it doesn't take much to get them out of time & would have to be serviced by a repair shop with the tools needed to fix the timing.

Aug 29, 2011 | Necchi Sewing Machines

1 Answer

The needle jams when i start sewing


Could be threaded wrong - check manual for proper threading
Needle could be bent - check and replace if needed
Needle plate could be damaged - see if any burrs are on it if so take to service dealer and have removed
Bobbin could be wound wrong - check manual
Bobbin could be bent - if so replace.

Jul 09, 2010 | Necchi Sewing Machines

1 Answer

I have a Necchi Royal Series 3205FA. I wanted to wind my bobbin. I could not loosen the Stop Clutch Knob. This is a NEW sewing machine. It isn't a strength problem. The part will not turn.


If you have a stop motion dial with little grooves all the way round the best way is to get a wide plade screwdriver, put the plade part on one of the grooves on the left hand side of the dial and give it a thump on top with your hand, that usually does the trick.

Feb 21, 2010 | Sewing Machines

2 Answers

My Nechhi Royal Series Sewing Machine Has stopped working


Make sure the stop motion wheel is tight, make sure you do not have any thread stuck in the raceway area if you get a buzzing sound from the motor

Feb 17, 2010 | Sewing Machines

1 Answer

Necchi Heavy Duty Sewing machine model 3205FA, bend needle while hemming denim skirt, replaced the needle, but now the needle is not picking up the bobbin thread, any suggestions for me to try???


Generally when the needle does not pick up the bobbin thread, it means the needle is either too far in or just plain the wrong length. YOu might want to try lowering the needle just a hair and see if that helps.

Apr 20, 2009 | Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Sewing Machines Experts

Cindy Wells

Level 3 Expert

6120 Answers

Chris Wetmore

Level 2 Expert

190 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...