Receive fax Do you put the paper in the same chamber as one sent

You have to cancel the fax. If its saying that then the paper sent to you was a legal sixe 8.5x14 and needs that type paper to receive the fax. Some faxes have legal trays and A4 but most don't.

You are set for MANUAL RECEIVE, when the fax rings, press the START button to receive a fax.

Check the MENUS for AUTO RECEIVE settings.

I not really sure on this machine if it has these setting, but most fax do. There is a setting that allows you to automatic choose reduction of a fax if the one sent was larger than 8 1/2 x 11. Good Luck

Thanks for your reply.. it seems we had put the new roll of paper in back the front... it is now working well ,..... thanks

M.DeBono

Most likely has a problem with the fax PCB board inside it. Its not worth repair.

It means you have a fax in memory that cannot be sent.

Do you have DSL or any kind of digital phone line? Do you have a dial-tone?

Unplug the power cord and re-plug.

the question is Why can't they read it????????
compressed, dark, light.......???????????

Face down. Blank side up. It doesn't matter which edge you send first.

Reset RING DELAY so that machine picks up on 1st ring, and does not disconnect before fax can be sent to you.

Unfortunately that is a function of the sending unit. If they did not program their number in, then you won't have a record. If this is a persistent problem, you may want to sign up for Caller ID. Even if they put the paper in upside down, your fax will still print a head on top of the page with the information they have programmed. If they program a wrong fax number, then all you will have is a wrong number. Wish I have better new for you. Ed