At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Do you know what a code diagnostic flow chart is ? You need to look the code up in a service info. repair manual an do the diagnostic's associated with that code. Test circuit wiring , view scan data etc.....
DTC P0410 Secondary Air Injection (AIR) System
its on all uSA cars , drivers door.
and in glove box operators guide, lost that. buy one.
look again? for sticker, it is there.
the door jam only covers stock sized tires.
and you didn't post that. P205/75-r15?
each tire made has a perfect pressure based on load on the tire.
every tire has chart for that. (all do)
if not a stock tire. you need a chart.
sold with 5 different tires sizes, says FSM book.
what is important is not driving with cupped or crowning tire treads
this is dangerous to do .
if unsure, do the chock test. (google "tire foot print chock test"
there are only 2 ways
1: the chart or door sticker facts
2: or chock tests.
30 PSI my be a good starting place on stock tires.
doing it right, avoids skids.
or worse careening..
Inside the glove box is a label with codes printed on it
Most start with a letter then numbers following it
The tank size is determined by the code
This code chart is a production chart of what is installed upon building this vehicle
On the web you can determine what you have by these codes
Look at this chart by clicking onto the link below to find your size tank you have in yours
There is a recall for the Cabrio F1 error code issue. I had mine fixed for free. They will have to replace the control board. You will need to call 1-800-253-1301 and tell them that your Cabrio washer is having the F1 error code and you read on the internet that Whirlpool has been making repairs. Have your model number, serial number, and purchase date ready for the person on the phone. The guy that repaired mine also replaced the washboard at the bottom for free...just ask the tech about it when he is there.
×