Programming I have a radio hand held scanner Cat. No. 20-315 I dont know how to program it to Chatham NY 12037 Could you please helpme?? ThankYou BettyAnn

If husband reset the scanner, it will have to be totally reprogrammed. If you dont have the manual for programming, try this site. RadioShack PRO 2018 200 Channel Conventional Desktop Scanner Cat No 20...

You may download a copy of the manual here. The programming instructions begin on page 37.

1. 1. Press "MAN."
   
2. 2. Press "ENT/PGM" to put the scanner in programming mode. You will see PGM appears.
3. 3. Use the number keys to enter both the channel storage bank and the channel number you want to assign to a frequency.
4. 4. Press "MAN."
5. 5. Use the number keys to enter the frequency and don't forget decimal point.
6. 6. Press "ENT/PGM" to store the frequency into the channel.
7. 7. you just stored a frequency into a channel. Repeat steps above until you have your scanner programmed how you want.

• Hope this helps...

1. 1. Press "MAN."
   
2. 2. Press "ENT/PGM" to put the scanner in programming mode. You will see PGM appears.
3. 3. Use the number keys to enter both the channel storage bank and the channel number you want to assign to a frequency.
4. 4. Press "MAN."
5. 5. Use the number keys to enter the frequency and don't forget decimal point.
6. 6. Press "ENT/PGM" to store the frequency into the channel.
7. 7. you just stored a frequency into a channel. Repeat steps above until you have your scanner programmed how you want.

• Hope this helps.
  

Detailed programming instructions are in the factory manual which you can download and print, at no cost, here:
http://scancat.com/OnLineHelp/OEM_Radio_Owners_Manuals/RadioShack-OlderManuals/Pro-95/pro95.pdf

You may also want to visit www.RadioReference.com for a comprehensive database of frequencies and trunking systems in use in your area, and a lot of other useful scanning information - including programming software that will let you load trunking systems without spending hours punching keys.

Bill B.
Listening in since the 60's

The best programming instructions are in the factory manual which you can download and print, at no cost, here:
http://www.uniden.com/pdf/BC60XLTom.pdf

For a comprehensive database of active frequencies in your area, and a lot of other useful scanning information, visit:
www.RadioReference.com

Bill B.
Listening in since the 60's

You didn't specify the model number of your scanner, so here's a link to a list of available Uniden scanner manuals. If your model number is listed, just click on the "Product Details" column to download/print the manual. It will provide detailed programming instructions.

http://www.uniden.com/index/manuals_results.cfm?cat=3

For a comprehensive database of active frequencies in your area, visit

www.RadioReference.com

The PRO-164 is a trunking scanner with many programming options, and attempting to detail the full programming procedure here wouldn't be practical. Rather, follow this link and you can download/print the full operating manual for your scanner.

http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/2000164_PM_EN.pdf

Hello there:
if you go to www.uniden.com and search for your scanner there is a section that deals with programming. ok
best regards mike

L live in Haywood county NC and I am running the following Radioshack scanners: Pro82, Pro95 and a Pro97. When will the rebanding take these scanners down. Also will the Pro97 beable to be rebanded as it really is a good scanner.