HP PSC 1210 All-In-One InkJet Printer Logo

Related Topics:

Anonymous Posted on Oct 08, 2014

Won't turn on

Printer goes through initializing, looking like it's going to power up and then shuts down. I've checked power sources and they a fine.

1 Related Answer


  • 122 Answers
  • Posted on Dec 30, 2009

SOURCE: computer won't turn on already replaced power

Try unplugging the PC for at least 10 mins. If that fails... it could be the BIOS failing to Boot. Leaving it unplugged my discharge the System and it may Boot, once it does it maybe best to update the BIOS. If the continues it will force you to replace the BIOS or the Motherboard. If the System is older than 3 years, I would replace the Motherboard and reinstall to a new hard drive and recover your data. Or buy a new system and recover your data by using a USB external HD Container.


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:


I have a Bosch 4100 table saw that won’t start. When I turn it on the motor just goes clunk and won’t turn. I’ve tried different extension cords and circuits. I’ve tried bypassing the switch and it does...

!!! with power disconnected !!!!
to saw

check there is no fine timber lodged in saw between saw and saw bench.
check the saw is locked on on trigger
Feb 07, 2021 • Bosch Saws

Kindle will not shut off-goes to shut off or cancel but wont move. doesnt charge well-doesnt always hold charge

Patricia, Using the power switch, you can forcibly reset your Kindle device. This reset will shut down the Kindle without accessing the shutdown command from within the Kindle's operating system, a particularly useful tool when dealing with a frozen Kindle. To initiate a hard shutdown, Kindle disconnect from its charger, slide and hold the power switch for about 20 seconds. This will force the Kindle to shut down, now it can be restarted normally.
Check links below for charging problems.
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Reset Kindle Fire When it Won Turn on or Charge

Troubleshooting Kindle Fire That Won Charge

Kindle Fire not charging

9 common problems with the Kindle Fire HD and how to fix them

Epson artisan 1430 won't recognize ink cartridges

press ink change button and while printer is checking if ink is ok press and hold power button for 10 second (it won't shut down the printer) and let go. then it will shut down by its self. turn it back on and printer will go through some checking (more then usual) and then it will see all ink cartridges. If that won't help your cartridge is not genuine.

My Acer Aspire 5810tzg won't start, I've check the power cable and battery and they work fine on other machines, it just won't turn on

There is one thing you can attempt before seeking repairs. You should try a power reset.

1) Unplug the AC adapter
2) Remove the battery
3) Hold down the power button for 30 seconds and then release it
4) Insert battery
5) Plug in AC adapter and see if the laptop can power on

If it does not power on, you may need to seek support with Acer.

My JVC KD-SH55 Car stereo won't switch on. It was in storage for a period and I installed it in my latedst car. All functions (receiver and CD) worked fine initially. It failed to come on today...

It sounds like a switched power or constant power issue have you checked the fuses. Their is all so a fuse behind the radio. Just unplug the harness going to the radio and it is behind that.

1994 gw Interstate - turn key on - no lights neutral or oil press

It sounds like there may be an electrical leak, If the voltage goes too low, the computer either shuts down or it can go stupid where certain things won`t operate. Try turning everything off, disconnect the positive lead from the battery and connect an ammeter between the positive terminal of the battery and the positive connector that goes to the bike. There should be very little drain from the battery, (I presume it`s got a clock and maybe a radio with presets that require power). I would say if there is more than say 10 - 50mA showing on the meter, you`ve got a leak. I`ve just been explaining about one of these bikes where it was the rectifiers that were leaking. I`m only guessing so I hope this helps. Ian


When the plotter goes through its initialization, it stops, the printheads move to the right side and the window displays "switch power off, check printhead path (2)" I've turned the power of an wiped things down, I've unplugged and then restarted but continue to get this message. What do I need to look for or do to get it back on track?


need new batteries.
Not finding what you are looking for?


Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6691 Answers


Level 3 Expert

8093 Answers

Grand Canyon Tech
Grand Canyon Tech

Level 3 Expert

3867 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides