<!-- from fixya rte -->How do I program viper 7254v remote - Vehicle Parts & Accessories

Hi

If you want to reset your Viper alarm, you can do so with your car's fob key.

1. Point the fob key toward your vehicle as the alarm sounds.
2. Listen and wait for your alarm to sound for six seconds. Press the lock button on your key. Your vehicle's Viper alarm will reset but the alarm will still be armed.

This may sound funny but my mom has a brand new Lincoln MKZ and was having the same problem with her remote starter. What I did was, I pushed the lock button on the remote and then pushed the start button and it started . Even though the car was already locked for some strange reason she has to push both if she wants to start it remotely . I'm not sure why this happens and not sure if it will work with your remote but its worth a shot. Good Luck

Dear Marta,

Here is a hands on to watch and program as you go. Follow to the link. How To program DEI Viper Python Avital Sidewinder Valet Hornet Alarm...


Here is another look. 1f Responder LE Remote Pairing



For your direct contact to Viper follow this link for any question. Viper Support



Fare. Well.

Try this site

https://chrome.google.com/webstore/detail/browse-manuals/hogjdcdnnjbjbbicpgmhkhkiemhbacml

https://www.google.com/search?q=program+a+ezsdei474+remote+to+a+viper+130xv

https://www.google.com/search?q=ezsdei474+remote+instruction+manual

https://www.google.com/search?q=viper+130xv+replacement+remote+control

..

get in vehicle turn key on with new key fob in car, let run for 20 or so then turn off . hit the unlock button it should be programmed but not promising anything lol

Viper or Python (RPN7701V/P/X) programming instructions: http://www.bluexray.com/viper7701/

To enter programming mode Press the Program button on the back of the remote or hold the four remote control buttons on the front of the remote simultaneously until one long beep is heard. Programming Mode has now been entered.
Beep/Vibrate Mode Within five seconds of entering Programming Mode, press Lock. The remote control will beep once for on, twice for off. The vibrate icon (13) will also turn on/off with each press.
Here's the owners manual for that system: http://www.directeddealers.com/manuals/og/viper/G5301V_05-06post.pdf
remote programming starts on page 15.

go to www.directed.com this is the manufacturer of the viper remote starters, there you should be able to download instructions.

Here is how you program the viper 5101 remote.

Programming the Viper Remote Starter 5101

Unlock the doors before starting

Push and hold f button for 8-10 seconds until amber light is on solid

Push Remote start button for about 4 seconds till amber light flashes 3 times

Put key in IGN to the on position but don

The Viper alarms will accept (if I remember correctly), 4 codes at one time. That is, 4 individual remotes, or two remotes two times, or one remote 4 times. So, if you program your remote 4 times, it will essentially remove any previously programmed remotes. Another option, and you'll have to check with your dealer, but I think there is a way to delete ALL remotes, and then program your remaining remote one time, and again, all previously programmed remotes are now removed from memory. This was done by the manufacturer just for such events.