Need a plastic replacement bowl and the blade on old iona food processor model jk140 style mfp4

Make and Model helps!!

Here are some 7 Cup Processors

Owner's Manual

KitchenAid https://www.kitchenaid.com > global > documents
Before operating the Food Processor, be sure the work bowl, blades/disc and work bowl cover are properly assembled on the base (see the "Assembling the Food.
56 pages

7 CUP FOOD PROCESSORS

KitchenAid https://www.kitchenaid.ca > global > documents

Insert the desired blade or disc into the work bowl. See next page for instructions. 5. Place the work bowl cover on the work bowl with the feed tube just.

Food Processor Manuals

Cuisinart https://www.cuisinart.com > manuals > food_processors

Find manuals for our current and discontinued food processor products. Maximize the performance of your food processor and learn about the safety features.

5KFP0719AOB-User-Manual.pdf

Winning Appliances https://www.winnings.com.au > public > manuals > 5KFP...
No information is available for this page.
Learn why
11 pages

GENERAL ELECTRIC FOOD PROCESSOR MODEL 106622F WORK BOWL

I was able to locate a bowl for the 106622F processor on E -Bay. You may be able to find a blade on E-Bay. From what I gather, there is no source for replacement parts, other than used parts. I hope this helps ! Good Luck....

Mine is in good shape except for the chopping blade. I would be interested in that part from yours, if you can not find what you need.

I have one with a missing lid..
Did you find any source for parts??

Thank you,
Dave

This answer comes 12 years later, mebbe toooo late. Turn the plastic bowl clockwise to unlock it.At the bottom of the bowl there are two rectangular holes. Insert some thick object like steak knife handle so it will come on top of the salient part. Use theses inserted thingy-s as levers. When you lift up from outside the bowl will go up, pushing the blade out. It works all the time, but don't forget to lube the shaft sleeve so you can lift the blade more easily.

I have the Black & Decker Shortcut food processor Model CFP10 and it has a broken bowl. I would prefer to replace the bowl but haven't found a source. So I would be willing to sell the good parts: Food Pusher, Food Chute/Cover; Food Fingers/ Reversible Disc, Disc Stem, Knife Blade. Make me an offer and e mail me at:
[email protected]. I'll accept Pay Pal or certified checks.

go to this site and you can order what you need:

http://www.smallappliance.com/department.asp?cur=USD&sid=18956&gid=18970&shopBy=Category&cam=drg_247-10377&drg=247-10377&gclid=CPPEqdb6zZgCFQw9GgodtGMO1A

Try this site for the parts. If I have model # I might be able to help more.

http://www.householdappliance.com/food_processor_parts.html

Good Luck and Please Rate FixYa!

Is the cover assembly engaged and locked into place? If you can't lock the cover into place, it's possible that part of the plastic on the cover assembly is broken and not engaging the white rod inside the bowl. Determine which part is at fault (either the bowl or the cover assembly) and replace it.

if it is the motor shaft cover, amazon or smallappliance.com