F63 displayed
Same issue here with the Water Path Control Unit of Miele W 4840. No teeth broken on any gear, and the motor was trying to turn the gears, but the red gear was stuck. Found heavy buildup from hard water inside the rotating valve itself, and on the spring under the red gear. I think the buildup was preventing the red gear from lifting over the detents to the next position. I disassembled (be sure to first mark red gear and post as it can be reassembled wrong, and take care the spring doesn't launch the red gear and spring across the laundry room when you release the little clips holding the red gear) and soaked the spring and its washer in CLR (calcium, lime and rust remover, from hardware store) and swabbed the rubber and plastic pieces with CLR to clean everything. Greased gear teeth and posts, and rubber seals, with silicone grease and reassembled. Note the double-wide tooth on the red gear aligns with a double-wide gap on the matching white gear, the one with the spring contacts.
I have washing machine miele gala grande w 3000.and i have a tech fa ult f63.what is this?
4,049 views
Usually answered in minutes!
×