Question about Epson Stylus CX6600 All-In-One InkJet Printer
Not printing, printer error. See documentation and call service.
Posted by Anonymous on
Could be the waste ink tank is full. Take a look in at www.fixyourownprinter.com. Aslso a useful download is the SSC Epson utility that carries out many 'managment' functioms and has its own forum also www.ssclg.com And last but not least - Epson customer support
Posted on Aug 06, 2007
This may be very simple. Turn the unit off and lift up the top. On the forward side of the unit you will find a little 'slider switch'. This is the scanner unlock - toggle the switch back and forth several times and leave in the unlock position. Turn on the printer and all will be well.
Posted on Sep 09, 2007
SOURCE: error message
OK guys quite a simple one....
with the printer on press & hold both the small red button ( far right ) and the green, colour copy button. Whilst still holding press the power button wait till the unit powers off. Press the power button again, shortly after the unit powers on, the lights flash, let go of the two buttons your holding. The screen shoul dnow say "Init EEPROM" if it doesn't repeat procedure till it does. Now press the green colour copy button once, screen should now say "Push power sw" Press and hold the power button, the unit will power off and on again, now release the power button and your printer should be working again. Now you should change your waste pads......
Posted on Dec 10, 2007
Tips for a great answer:
Jan 14, 2011 | HP LaserJet 4700 Printer
Sep 25, 2009 | HP LaserJet 2420 Printer
Jul 04, 2009 | Lexmark T644 Laser Printer
May 29, 2009 | Epson Stylus CX6400 All-In-One InkJet...
May 26, 2009 | Epson Stylus CX6400 All-In-One InkJet...
Mar 07, 2009 | Epson Stylus CX3200 All-In-One InkJet...
110 people viewed this question
Usually answered in minutes!