Question about Motorola Radio Communications

1 Answer

Can I clone a RDM2070d to a CP110m with a cloning cable?

These radios look identical. What is the difference? I have the manual for the 2070.Thanks in advance. :)

Posted by Tim Burdeshaw on

  • Signal_5 Oct 03, 2014

    Hi Mr. Burdeshaw, I want to help you with your question, but I need more information. Can you please tell me if the CP110m has a display or not? Motorola foes not have information on the specific model.

×

Ad

1 Answer

Motorola Mobility

  • Official Brand Answer
  • 3,100 Answers

Contact Motorola Solutions


portal motorolasolutions com
Mark
Motorola Mobility Support

Posted on Oct 15, 2014

Ad

5 Related Answers

Anonymous

  • 5 Answers

SOURCE: vertex 180 cloning

from my own experience, vertex customer service in california has been excellent. try giving them a call. 714-827-7600

Posted on Feb 26, 2008

Ad
eradiostore

eradiostore

  • 1658 Answers

SOURCE: Cloning

The methods differ by model. Contact your local Kenwood dealer to see if they can recommend the appropriate method for your Kenwood model.

Posted on Aug 16, 2008

buffaloman74

  • 4 Answers

SOURCE: how to clone a kenwood TK 3160

Ok. I have looked through the service manual for both the 2160 and 3160 and can not find anything that indicates that you can clone with just a cloning cable and not use software. However the 2170 and 3170 say to turn the power on While pressing the B button which yours doesn't have. Try turing on the radio while pressing any one of the side buttons.
Hope this helps.
P.S. The software is reasonably easy to get and IS much easier to use.. dan

Posted on Mar 24, 2009

eradiostore

eradiostore

  • 1658 Answers

SOURCE: I require the manual for cloning instructions for

re: NKN6376A cloning cable

You will find the instructions at the following link (search for "cloning instructions") http://www.batlabs.com/ht6hack.html

In researching this question we located one source who said the radio to be cloned must have the cloning feature activated in the RSS.

Best regards.

Posted on Nov 10, 2009

Anonymous

  • 2 Answers

SOURCE: Will the Radio Shack cable (stereo male to male)

looking for v360

Posted on Oct 30, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Clone Motorola BPR40 with PMDN4060AR, but I'm getting a low continual tone from the slave radio from Ch 2 above


Even with a cloning cable, you cannot always clone. The source radio and receiving radio must (1) be the same exact model, (2) have cloning enabled in the software a dealer used when they were programmed the first time. It sounds like you are doing the correct procedure.

Nov 18, 2015 | Motorola Radio Communications

1 Answer

I just want to know how to clone the motorola rdm2070d


You will need the RLN6303 RDX Radio to Radio Cloning Cable, or two drop-in chargers, or the multi-unit charge tray. Instructions for cloning are on page 51 of the user guide: http://www.weatherconnection.com/manuals/RDV5100.pdf Best regards.

Jul 08, 2011 | Motorola Mag One BPR40 Two Way Radio

3 Answers

I require the manual for cloning instructions for the motorolla HT-600, where I can find it. And with the Cloning Clone Cable for Motorola MT1000 HT600 P200 can i clone the frequencies on a radio and...


Now, you can find different types of clone such as Gaming, E-Commerce, Social Media, Music, Digital Marketing
for all purpose.
You can try Best of Clone scripts site to improve your work and business so it may helpful for you.

Nov 09, 2009 | Motorola For MT1000 MTX800 MTX90010v...

1 Answer

How do I use a cloning cable to program a hand held MT1000


Cloning Procedure:
(The content of radio A is to be duplicated into radio B)
1. Turn off radio A and turn on radio B.
2. Connect the cloning cable (NKN6376A) to the Universal Connector of both radio A and radio B.
3. Place the PL switch on radio A to the carrier squelch position for full cloning, or the PL position for partial cloning. Full cloning will duplicate the content of radio A to radio B, except for the deviation and squelch settings. Partial cloning is recommended due to deviation variations from radio to radio. (Later version MT1000's (B model for 6, 16, and 99 channel portables; A model for 8 channel) have partial cloning.)
4. Simultaneously depress the PTT and Monitor button on radio A and hold.
5. Turn on radio A. The green LED turns off. Release the PTT and the Monitor button on radio A (HT600's and older MT1000's (A model for 16 and 99 channel portables) beep when cloning is complete). Turn radios "off and on" to reset.
6. Cloning is complete once the green LED turns off. Release both the PTT and Monitor button on radio A. Turn radio A off and on to reset.

NOTE:
For MDC front covers (NTN5456, NTN5457, NTN5458, NTN5459, and NTN6009B), make sure that radio B is turned on before it is connected to the cloning cable.

NOTE:
All VHF wideband radios (146-174MHz) are "C" model radios. A "C" model radio can be cloned only to/from another "C" model radio. An attempt to clone a "C" model radio to an "A" or "B" model radio will result in an unsuccessful cloning attempt.
Any unsuccessful cloning attempt (depending on operating condition of the radio) will result in one of the following alerts:
1. in receive (rotary radio) - 1600Hz continuous alert tone
2. in receive (display radios) - 88 displayed on LCD
3. in transmit - 1600Hz beeping alert tone

Nov 04, 2009 | Motorola For MT1000 MTX800 MTX90010v...

3 Answers

Program motorola rdm2070d need to program


The RDM2070D is non-programmable. It operated on pre-selected frequencies. (This radio belongs to a major corporation, and is not intended for use outside their company.)

Oct 12, 2009 | Radio Communications

2 Answers

Motorola BPR40 how to clone


How To Clone a BPR40 Radio
Cloning duplicates the contents of your radio (master radio) into the new radio (slave radio). Tuning and alignment information are not affected by cloning.

Set Up the Master Radio

1. Turn off the radio.
2. Press and hold Programmable Button 1 (the top programmable button) and turn on the radio. Keep pressing the Programmable Button 1 until beep is heard twice.
3. Release Programmable Button 1. Notice the LED changes to RED

Set Up the Slave Radio
1. Turn off the radio.
2. Press and hold Programmable Button 1(the top programmable button) and turn on the radio. Keep pressing Programmable Button 1 until the beep is heard three times.
3. Release Programmable Button 1. Notice that the LED changes to GREEN

BPR40 Radio to Radio Cloning Procedures

1. Connect the cloning cable to both the Master and Slave radio.
2. Press and release Programmable Button 1 of the Slave radio.
3. Within 2 seconds Press and release Programmable Button 1 of the Master radio.
4. The LED for both radios show flashing orange during cloning.
5. Once cloning is completed, an

Mar 24, 2009 | Radio Communications

1 Answer

How to clone a kenwood TK 3160


Ok. I have looked through the service manual for both the 2160 and 3160 and can not find anything that indicates that you can clone with just a cloning cable and not use software. However the 2170 and 3170 say to turn the power on While pressing the B button which yours doesn't have. Try turing on the radio while pressing any one of the side buttons.
Hope this helps.
P.S. The software is reasonably easy to get and IS much easier to use.. dan

Dec 09, 2008 | Kenwood...

1 Answer

Cloning


The methods differ by model. Contact your local Kenwood dealer to see if they can recommend the appropriate method for your Kenwood model.

Jul 28, 2008 | Kenwood Radio Communications

1 Answer

Vertex 180 cloning


from my own experience, vertex customer service in california has been excellent. try giving them a call. 714-827-7600

Feb 20, 2008 | Radio Communications

2 Answers

Motorola GP2000


http://www.batlabs.com/gp2000.html

Cloning
These radios support cloning parameters between a master and slave radio.
Cloning only transfers the user's settings from the master radio to the slave. Things like tuning values, serial number, etc. are not changed.
To clone a master radio to a slave (target), perform the following:
    • Make sure both radios are off
    • Connect the cloning cable between the two radios through the programming port
    • Turn on the slave radio
    • Press and hold the "A" button on the master radio and turn it on
    • The master radio will display CLONE if cloning can proceed, otherwise an error will be displayed
    • The slave radio will display PROG while it is being programmed
    • When cloning is complete, the master radio will display END and the slave radio will reset automatically
    • Disconnect the radios from the cloning cable

Feb 15, 2008 | Motorola Multi Unit Charger with Cloning...

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

216 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1658 Answers

Jane

Level 1 Expert

31 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Motorola Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...