Question about Toys
You need to be more specific. Where is the fuse located? What type of fuse? What does it look like? How did it stop working? Is the fuse bad?
Posted on Oct 02, 2014
Tips for a great answer:
Apr 04, 2018 | Kenmore Kitchen Ranges
Feb 11, 2016 | Ford Cars & Trucks
Dec 25, 2015 | Lexus GX 470 Cars & Trucks
Feb 22, 2015 | 2006 Toyota Camry
Fig. Fig. 7: Visual examination will reveal a blown fuse, but it should not be replaced until repairs are made
Fuses protect all the major electrical systems in the car. In case of an electrical overload, the fuse melts, breaking the circuit and stopping the flow of electricity.
If a fuse blows, the cause should be investigated and corrected before the installation of a new fuse. This, however, is easier to say than to do. Because each fuse protects a limited number of components, your job is narrowed down somewhat. Begin your investigation by looking for obvious fraying, loose connections, breaks in insulation, etc. Use the techniques outlined at the beginning of this section. Electrical problems are almost always a real headache to solve, but if you are patient and persistent, and approach the problem logically (that is, don't start replacing electrical components randomly), you will eventually find the solution.
Each fuse block uses miniature fuses (normally plug-in blade terminal-type for these vehicles) which are designed for increased circuit protection and greater reliability. The compact plug-in or blade terminal design allows for fingertip removal and replacement.
Although most fuses are interchangeable in size, the amperage values are not. Should you install a fuse with too high a value, damaging current could be allowed to destroy the component you were attempting to protect by using a fuse in the first place. The plug-in type fuses have a volt number molded on them and are color coded for easy identification. Be sure to only replace a fuse with the proper amperage rated substitute.
A blown fuse can easily be checked by visual inspection or by continuity checking.
The fuse block is located on the lower left side of the instrument panel. To access the fuse panel, open the driver's side door. Pull off the fuse panel cover to get to the fuses. Spare fuses and a fuse puller should always be kept here. Various convenience connectors, which snap-lock into the fuse block, add to the serviceability of this unit.
Aug 10, 2012 | 2000 Pontiac Sunfire
Jan 15, 2012 | Televison & Video
Jul 14, 2010 | 1996 Chevrolet Corsica
Dec 16, 2009 | LG LRFC25750 Refrigerator French Door
Mar 02, 2009 | NAD C320 2-Channel Amplifier
120 people viewed this question
Usually answered in minutes!