Nextwave SUC-2500C English manual

It sounds like you are having difficulty getting a signal from your satellite receiver on your RCA ColorTrak Plus TV. There are a few things you can try to troubleshoot the problem:

1. Make sure that all of the cables are properly connected between the satellite receiver and the TV. Double-check that the yellow, red, and white cables are securely plugged into the correct inputs on the TV.
2. Check the settings on the satellite receiver to make sure that it is set to output to the correct input on the TV. Consult the user manual for your satellite receiver for instructions on how to access and change the settings.
3. Check the settings on the TV to make sure that it is set to the correct input. This can usually be done by pressing the "Input" or "Source" button on the TV's remote control.
4. Check the satellite receiver's LNB (low noise block downconverter) and make sure it's pointed at the satellite.
5. If the above steps don't work, try resetting both the satellite receiver and the TV to their factory default settings. This can often resolve issues with the TV not receiving a signal.
6. If you are still having issues, it's possible that the TV's tuner is not compatible with the satellite signal, or the TV's tuner is malfunctioning. In this case, you may need to consider getting a separate satellite TV tuner and connecting it to the TV.
7. If you've tried all the above and still having issues, it's best to contact the manufacturer of your satellite receiver or TV for further assistance.

It's important to note that the setup and troubleshooting process may vary depending on the specific model of your TV, satellite receiver and antenna. Also, if you are not comfortable with troubleshooting electronic devices, it's best to contact a professional technician to do the job for you.

1750,1772,1753,1730. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common set-up codes to check with TVs and other devices are given, in the order of the "device's brand name list" in alphabetical order. Pull up older posts. Surf the site with patience. Surf the sites by type in the brand name to your set, in its search box.
http://electro-medical.blogspot.com/
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Most Satellite receivers can be used with a UNIVERSAL Remote. You do not have use the one that came with the receiver. If you get an inexpensive Universal Remote control it comes with directions and a list of electronic devices that will work with that controller. You will have to inspect the Satellite receiver for the correct information regarding the make, model, and other details. Write them down on a pad and keep this information for setting up Remote.

http://www.nextwave-plus.de/downloads/protek_9600ip_V2_english.pdf

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

Yes there is an option for ouptuting 480i signal from most hd receivers. You will need to check the specifics for the satellite dish receiver as to the channel that the TV should be on as well as how to set it to the resolution that you need. (I know some Dish receivers need channel 60 for the SD TV (coax (RF) connection) when it is TV 2 but channel 3 or 4 for TV 1.) Also check your TV so that you can use the best possible input available.

However, you may not be able to read the closed captions unless you enable them on the receiver. (Apparently, the encoding has changed.)

The manuals for some satellite company receivers are on their website. For example, Dish network manuals are here: http://www.dishnetwork.com/supportsection/manuals . Their manual for the Solo VIP 211k describes connecting the receiver to a SD TV on page 91 (page 97 in the PDF version).

I hope this helps.

Cindy Wells
(I'm not aware of any satellite system that doesn't use a set-top box. If you do not have a receiver, then the above does not apply and you may not be able to get a signal.)

If you were to log on to the manufacturer's web site, I think you will be pleasantly surprised as usually one is able to download, by model number, Customer Instruction Manuals, list of Dealers for spare part supplies as required.

The information is normally free of charge.

I hope this helps.

My friend has bought a SDFTA11 receiver the same as mine. I can receive spanish channels via Astra 19.2 but we cannot receive these channels on his, even when we use my dish.
It shows 0% sig on 11.509V when my system shows 90% and works well. Can anyone help.
Paul ([email protected])

You can connect the satellite box to the TV and the dvd recorder with a coaxial splitter but you need to check with the recorder's manual for their recommended installtion procedure for your specific purpose.

I need the tv reciever box that used Internet connection only not dish or cable

French TV works on a diffrent frequency to uk i cannot remember the details but one is PAL as memory serves me a modern tv should switch over in the settings
Anthony