Question about Frigidaire GLTF2940ES Front Load Washer

1 Answer

EFO error code

What does EFO code mean on our washing machine?

Posted by asiler240 on

Ad

1 Answer

blueextc3221

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 15,935 Answers

Frigidaire, Zanussi, AEG, & More....

EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine.

1. there is a blockage in the filter or drain hose.takes too long to drain out.
2. over dosing of powder or liquid. again can cause an air lock in the pump which slows the drain pump down.

Check the filter and drain hose and test again. this fault will only come up at the end of a cycle.
You do not need to reset the machine to get rid of the fault code as this is automatically deleted.

Run an empty load with no detergent in an attempt to get rid of the code.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 16, 2010

Ad

5 Related Answers

geemarie

Gayle Ashbach

  • 876 Answers

SOURCE: Fridgidare washing machine front loader

It can mean one of two things. You did not use an HE ( High energy detergent) or you used to much so there are too many suds in the washer. It can also mean that if you are using warm water, the hot water is not coming in, so you would need to make sure the hoses are connected correctly, the hot water is turned all the way on and that the little filter at the end of the hose (washer end) is clean.

Posted on Aug 02, 2008

Ad
geemarie

Gayle Ashbach

  • 876 Answers

SOURCE: Fridgidare Front Load Washing Machine

It means one of two things. You either did not use an HE detergent or you used too much, so that there are too many suds in the washer. It can also mean that if you are using warm water, the hot water is not getting in. The hoses need to be checked to make sure they are hooked up on the right faucets and the hot water faucet should be turned all the way on. You would also need to unscrew the water hose at the washer end and make sure the little filter is clean, so tha the hot water can get through.

Good Luck!

Posted on Aug 02, 2008

Anonymous

  • 1 Answer

SOURCE: flashing EFO error code

spoke with electrolux and they tell me that it is over sudsing problem. The washer must use HE detergent or use only a the lowest amount on the cup.

Posted on Sep 17, 2008

Anonymous

  • 65 Answers

SOURCE: Error code EFO or EF0 I can't tell the difference.

You need to refer to the owners manual in trouble shooting catagory, if you can't find yur answer there contact Fridgadaire ither by phone or e-mail and choose the help section.

Posted on Jan 05, 2009

blueextc3221

blueextc3221

  • 15935 Answers

SOURCE: EFO displayed on my machine while running and beeped.

EFO is not a Kenmore Error Code.

Zanussi & AEG EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine.

1. there is a blockage in the filter or drain hose.takes too long to drain out.
2. over dosing of powder or liquid. again can cause an air lock in the pump which slows the drain pump down.

Check the filter and drain hose and test again. this fault will only come up at the end of a cycle.
You do not need to reset the machine to get rid of the fault code as this is automatically deleted.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

Posted on Sep 11, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Affinity washer flashing EFO


Good Morning Friend,

I understand that your Frigidaire Affinity washer, model# ATF7000E, is flashing an EFO code. I do not show an EFO code for your appliance.

I do show an EF1 code, which means the drain pump is clogged. In this instance you would unclog the drain pump.

I also show an EF2 code, which means too much soap was used. All you would do for this would be to try using less soap.

It could also be a false error code. I suggest resetting your washer, by either unplugging it or shutting the power off at your homes circuit breaker, for 3-5 minutes. When you restore power, start any cycle on your washer. I ask that you please follow up with a comment on the post, at your convenience, to advise if further troubleshooting is needed or if your washer status has changed successfully. Hope this is helpful.

-Best Regards-
WP

May 15, 2014 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

EFO code cameup.


Its not EFO its EF0 .Theremust be some thing blocking the pump .For example socks,underwear etc. The water was not cycling through properly. Cleaned it out and everything works fine.Use proper detergent mentioned for your model because even SUD formation can cause this error.

Jun 18, 2010 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

Affinity ATF7000E Front Load Washer: where do i find what efo means on my affinity wash...


Frigidaire, Zanussi, AEG, & More....

EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine.

1. there is a blockage in the filter or drain hose.takes too long to drain out.
2. over dosing of powder or liquid. again can cause an air lock in the pump which slows the drain pump down.

Check the filter and drain hose and test again. this fault will only come up at the end of a cycle.
You do not need to reset the machine to get rid of the fault code as this is automatically deleted.

Run an empty load with no detergent in an attempt to get rid of the code.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!!

May 16, 2010 | Frigidaire Affinity ATF7000E Front Load...

1 Answer

EFO displayed on my machine while running and beeped.


EFO is not a Kenmore Error Code.

Zanussi & AEG EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine.

1. there is a blockage in the filter or drain hose.takes too long to drain out.
2. over dosing of powder or liquid. again can cause an air lock in the pump which slows the drain pump down.

Check the filter and drain hose and test again. this fault will only come up at the end of a cycle.
You do not need to reset the machine to get rid of the fault code as this is automatically deleted.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 15, 2009 | Kenmore 44102 Front Load Washer

1 Answer

My washer at the end of all the washing, spinning..etc...display the code EFO and all lights are opened...what does it mean. and I would to know if there is a listing of all the error codes and the meaning...


My washer at the end of all the washing, spinning..etc...display the code EFO and all lights are opened...what does it mean. and I would to know if there is a listing of all the error codes and

Dec 15, 2008 | Frigidaire Washing Machines

1 Answer

Flashing EFO error code


spoke with electrolux and they tell me that it is over sudsing problem. The washer must use HE detergent or use only a the lowest amount on the cup.

Jul 19, 2008 | Frigidaire GLTF2940ES Front Load Washer

1 Answer

Efo code


Frigidaire, Zanussi, AEG, & More....

EFO = Filter Blocked (low flow) and it is accessible from the bottom front of the machine.

1. there is a blockage in the filter or drain hose.takes too long to drain out.
2. over dosing of powder or liquid. again can cause an air lock in the pump which slows the drain pump down.

Check the filter and drain hose and test again. this fault will only come up at the end of a cycle.
You do not need to reset the machine to get rid of the fault code as this is automatically deleted.

Run an empty load with no detergent in an attempt to get rid of the code.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question!!!

Jun 12, 2008 | Frigidaire GLTF2940WH

1 Answer

ERROR CODE EFO


You can call or email the manufacture to find out.

May 27, 2008 | Frigidaire GLTF2940WH

3 Answers

Error messages EFO and E10


It is simple. The wrong soap or too much soap will caused EFO to flash. I overfilled the machine with soap by accident. It started flashing with EFO and I went nuts. What could be wrong with it now?! Too much soap or not the right kind of soap will cause this problem.
Plus, I found a sheet of paper that gives the codes.

This is better than when the strainer plug gets filled up and you have to take the machine apart to clean the little strainer.

Apr 16, 2007 | Frigidaire Affinity ATF7000ES Front Load...

Not finding what you are looking for?
Frigidaire GLTF2940ES Front Load Washer Logo

6,163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Frigidaire Washing Machines Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3053 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Poppa Maddo
Poppa Maddo

Level 2 Expert

372 Answers

Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...