Question about Whirlpool ED2FHEXN Side by Side Refrigerator

Open Question

Water selonoid is leaking at the bottom on the refrigerator

Selonoid has a crack in at on the refrigerator side

Posted by Anonymous on

Ad

5 Related Answers

peyton32034

peyton thompson

  • 410 Answers

SOURCE: refrigerator leaks water

most likely you have a plugged drain int he freezer compartment. if yo will look under and behind the lower basket in your freezer you will most likely see a bunch of ice build up. clear this ice out then you will see a drain hole in the center section behind the metal cover in the rear try to get some hot water into this hole to clear ice and to clear the drain then u shoul be good to go. thanks for using Fix Ya Peyton

Posted on Feb 18, 2009

Ad
Sea Breeze

John Tripp

  • 4656 Answers

SOURCE: Whirlpool Refrigerator(side by side) leaking water

First question would be is your ice machine leaking? If so then disable the ice machine until we can find the cause of leaks and repair them. Is the freezer freezing well? Food compartment temps OK?. Let me know and I will work to help you resolve this. Sea Breeze sea [email protected]
visit my site below

http://servicepartstec.blogspot.com/

Posted on Mar 30, 2009

Ad

Anonymous

  • 18 Answers

SOURCE: my ge refrigerator leaks water

During defrost cycle, the water produced is suppose to drain away through a small drain hole located behind the racks in the freezer section where you'll need to remove the rear panel to see the drain hole. This hole it very likely clogged.
Be careful to unplug the refrigerator before doing any work on it!

Posted on May 29, 2009

localwonder

Michael Masters

  • 6784 Answers

SOURCE: My refrigerator leaks water from the inside

Your refrigerator has a drain that leads to the exterior drain pan beneath the refrigerator. Occasionally this drain can become clogged resulting in standing water inside your refrigerator. A similar drain exists in the freezer, which when clogged results in ice build up on the floor of the freezer.

The drain is located either on the floor of the refrigerator, beneath the vegetable crisper, or in the wall behind a drain funnel.

Clear the drain by forcing a solution of water and bleach or water and baking soda into it with a basting syringe. If the solution will not flow through, slide a length of ¼ inch flexible tubing into the drain tube to push the clog through to the drain pan. Remove the tubing after clearing the clog.

NOTE-(This may be a leveling issue as well)

It is important for the refrigerator to be level. If it is not level, doors may not open or close properly and may not seal tightly. Also, drainage from the defrost cycle might be impaired as might the ice making cycle. The appliance was engineered based on it being installed in a level position. While there may be some tolerance for out-of-level installation, the appliance will operate at its best when properly leveled.

Place a level on top of the refrigerator near the front. Do not put it on the door because the door may not be aligned with the refrigerator case. Check that the refrigerator is level from side to side. Next turn the level to check that it is level from front to back.

If it is not level, adjust one or more of the adjustable leveling feet until it is level. The feet are bolts that can be turned to raise or lower the refrigerator. If they cannot be adjusted with your fingers, use a crescent wrench or pliers.

If you have an ice-maker, it should also be checked for level after first leveling the refrigerator. An ice-maker that is out of level will spill water into the ice bin or into the freezer. It can be repositioned by loosening the mounting screws, adjusting it for level and then re-tightening the screws.

Posted on Oct 30, 2009

woodchuck789

Charles T Nevin

  • 4070 Answers

SOURCE: water leaking from the bottom of my conquest refrigerator

Normal 0 MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-fareast-font-family:"Times New Roman";} Your evaporator coils frost up in normal use and every eight hours or so the entire unit shuts down and the defrost heater comes on to melt the frost. This cycle last about 20 minutes. The melted frost drips into a drain pan and through a drain tube to the drain tray under the freezer/refrigerator where it's evaporated by the condenser fan.


Your drain tube may be stopped up with ice at the upper end because it drains too slow because it's stopped up at the lower end in the evaporator pan under the unit at the floor. It can get dust and mold in it. Once you get the ice out at the top a little pressure with a turkey baster will usually clear it out. Flushing it out with hot water and clorox may help.
Make sure it drains quick enough to prevent refreezing. . The drain should be located below the evaporator coils on the lower back of the freezer.

Posted on Dec 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore 10657575791 changed water valve selonoid still not filling


water line maybe clogged. Check. Do you have the proper waterline pressure?

Jul 07, 2014 | Kenmore 55612 / 55614 / 5561 / 655619 Side...

1 Answer

Ice dispenser motor removal


It is behind the ice bucket, remove ice bucket and you will see it there, however, it is a continuous run type motor so the best way
to defrost it is to run it by depressing the ice dispenser lever until you free it up after removing the ice bucket, it may take up to 5 minutes to thaw it out

Dec 20, 2017 | Whirlpool GS5SHAXN Side by Side...

1 Answer

I have a Kenmore side by side refrigerator Model 106 9552911 and at times water just keeps running and overflows the ice maker and onto the floor. If I shut the water supply off for a few minutes and then...


Back bottom of fridge is the water selonoid with a plug on it. If you have an electric meter check power on that when it calls for more water, if it has power for about 10 seconds and stops but water still flows then that selonoid is bad if not then ice maker water timer wheel might not be hitting the switch.

Jan 27, 2018 | Refrigerators

1 Answer

Water not draining out


typically this problem is caused by a relay selonoid located at the output hose of the water pump. You will need to remove enough of the outside cover to see the water pump. The valve that is connected to the selonoid will be visible - and you can place the machine on the drain portion of the wash cycle and you will see that the selonoid does not operate. It can be removed (2 or 3 screws) - and a new one installed. That should cure your issue.

May 21, 2010 | Dishwashers

1 Answer

Ice crusher don't work


Hi, It sounds like the selonoid that shifts the auger is not working. This part is located behind the panel that the bucket pushes against. The little wire arm on the bucket goes into this. Sometimes they just get froze up from the moister. If you remove the panel/section the selonoid is in, you can see if the part has went bad.
I hope this helps you. Please let me know If I can assist you further.

Vic

May 23, 2009 | Maytag MSD2650H Side by Side Refrigerator

1 Answer

Water flow to my model 600 seems to be too quick. It splashes all over inside my furnace duct and over fills the drain causing water to run all over the floor. Could this be a bad selonoid?


It is not likely to be caused by the selonoid valve. The selonoid is designed to be either open or closed, so if the unit is calling for humidity, it should be 100% open allowing as much water as possible to flow through. In cases of a bad selonoid, it will usually stick open or stick closed, but I have never heard of one allowing too much water through. Check to make sure your drain is clear and that the incoming line to the humidifier is positioned properly on the inside of the unit. If this doesn't solve the problem, it could be that the water line to the humidifier is too large, allowing more flow than the unit is designed for.

Dec 16, 2008 | Aprilaire 600 Humidifier

1 Answer

96 bonneville se non supercharged


check gas cap seal will cause small leak codes.

Nov 09, 2008 | 1996 Pontiac Bonneville SE CA Value

Not finding what you are looking for?
Whirlpool ED2FHEXN Side by Side Refrigerator Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Refrigerators Experts

John Tripp
John Tripp

Level 3 Expert

4656 Answers

jdthefixer

Level 3 Expert

746 Answers

Marvin
Marvin

Level 3 Expert

85231 Answers

Are you a Whirlpool Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...