- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You shouldn't have to, the traverse/pick-up assembly is not like older models where calibration is required. Just make sure you remove the solder bridge before trying to use the unit. This solder bridge is located on the new assembly's PCB.
If you have the CDJ800, then the following will show you:
Yes, sounds like you have a bad traverse assembly (laser). You can replace it yourself, however, I wouldn't suggest it, as you need to calibrate the assembly after the installation, and remove a solder bridge (which keeps the unit safe during transport). It is a little complicated, if you don't have experiencing doing this type of work. Taking it to a service center would be your best option.