- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Please Always remember that first you should install its software and then attach the hardware or when the software required during installation. If you follow my instruction, you will get succeed in installation of any hardware and also in this case.
did u follow the installation instructions for the scanner, sounds like you may have missed a step or done the software installation incorrectly, there are ways around any problem like this, it all depends on what the operating system of your computer, so let me know if you can't get it right what operating system u have, also remember many many types of hardware get sold with software that is defective, so go to the Agfa product support site for the scanner and download the latest version of software
Dear sir,I am sory for your problem.Please format your oparating system i mean you install new windows.some times optical driver did not read properly data cab file,So hardware driver is not support properly.Windows xp SP3 is not complite version some messing.
Thanks You are success
Best thing for you to do is go on the manufacturer site ... of the modem and go under support and download the latest drivers and software for the modem. There has probably been some updates since the modem has been sitting on the store shelf that address your problem installing the software. I hope this helps.
control panel add remove hardware
scroll down and find any programs that the cam software may have installed
then restart and try installing again
plug in cam when asked
make sure you have no other programs running during install
also make sure your cam is compatible with os
go right to their website and download the appropriate driver/software and install it from your computer instead of the cd. incidentally, remove the cd from the drive and inspect the working side... the shiny side and see if it has any smudges or scratches. the cd player may not be able to read it.
it's not mentioned but is that a pc or mac and what operating system are you using ?
vista has this problem , see below webite Error message when you try to install a new hardware device on a Windows Vista-based computer: "Windows encountered a problem installing the driver software for your device GET basis information http://support.microsoft.com/kb/940199/en-us
Older scanner that were around in Dos day - Win 95/8 Are not compatable with NTFS systems. However this one thing to try. Go to my computer/Help/and type /Compatability This computerfacility that allows the computer to run as Win 98- It may just work.