Question about Sony Ericsson W300 Cellular Phone

1 Answer

Buttons losing function

I just got the w300i and some of the buttons are starting to mis-function or just not work the down arrow on the navigation pad is not working at all and the 0 digit displays 08 when I hit it and recently the navigation pad buttons began scrambling functions so the middle button doesnt go to the menu instead it goes to text messages please help much appreciated.

Posted by waleedk7 on

  • bb319 Nov 21, 2007

    I have the same problem. The *, 0, #, down arrow, and clear keys do not work anymore. Just out of the blue. The phone is useless w/o these keys.

  • Anonymous Dec 15, 2007

    i have the same problem but when i put heat on the phone it works for a thew hours i think its water damage

×

Ad

1 Answer

Anonymous

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

If these phones are still under warranty, take them back. It is a motherboard issue. I hope this helped.

GOOD LUCK!!

Posted on Dec 14, 2007

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove closed caption on the screen?


If you have a digital Set-Top Box with digital cable service: Using Navigator™: Press SETTINGS on your remote. Using the left/right arrow buttons, scroll to Quick Settings. Using the up/down arrow buttons, scroll to Closed Captioning. Press SELECT on your remote. Using the up/down arrow buttons, scroll to highlight On, On with Mute or Off. Press SELECT on your remote

Nov 30, 2016 | Televison & Video

1 Answer

How to change ip address on hp 5500ps


There are three ways of configuring IP address on any HP Printer:
A.- Using the control panel
B.- Using the web server
C.- Using the Jet Admin Utility
We'll deal with the contro panel setup.
To access the contro panel menus
1. Press OK (Check Mark) button once to access MENUS.
2. Press Up Arrow or Down Arrow buttons to navigate the listings.
3. Press OK (Check Mark) button to select the appropriate option.
4. Press Return to return to the previous level.
5. Press OK (Check Mark) button to exit the menus
So to configure IP address:
Press Check Mark
Navigate to the CONFIGURE DEVICE Menu using Down Arrow (the menu scrolls, so you may use any combination of Up/Down arrows)
Navigate to the I/O Menu
Navigate to the EIO 1 menu
Navigate to TCP/IP
Navigate to BootP entry
Press Check to disable it (Off)
Press return
Navigate to IP Address, press Check
Use Up/Down buttons to change the address, check to move between octets.
When finished, press Return
In the same way, enter Mask and Default Gateway
Press Return until you are out of the Menus.
Done

Jul 30, 2014 | HP DesignJet Office Equipment & Supplies

1 Answer

The factory reset sequence using the front buttons! I had it once and it was easy, then I lost it and need them again.


if you are having issues with the display, try to press and hold the first or the left most buttons located at the bottom right section of the monitor for about 2 to 3 seconds. this should allow the display to auto adjust. if this does not solve the issue, press any of the function buttons with left or right arrow symbols to make the OSD or function menu to show up, then continue to press the left or right buttons to navigate to the list of menus until you find the RECALL option. Once this has been selected, use the UP or DOWN arrow to select Yes to reset to factory default.
Hope this helps. :)

Jul 16, 2013 | Computers & Internet

1 Answer

Mouse didn't detected


Touch pad usb or wireless mouse ?
Laptops use the convenient touchpad and integrated scroll mouse that allow you to use just your finger to navigate Web pages, documents and open files and programs. Just like all other hardware, the laptop's integrated touchpad and mouse can experience errors and problems that cause you to lose functionality for a length of time. Whether the laptop's mouse is not working because of internal errors or conflicts with another device, several "tricks" can work to restore it.

Locate the function "Fn" button on your laptop in the lower left corner of the keyboard. Look in the keyboard's upper row (the F1 through F12 buttons) for an icon of a touchpad or computer mouse. This keyboard button acts as the toggle switch to enable and disable the built-in mouse and touchpad function. Press and hold the "Fn" button together with the mouse icon button. Look for the disable/enable symbol that briefly displays on your screen. Slide your finger over the laptop's mouse and attempt to use it as normal. Press the Windows keyboard key if using Windows 7, type "main.cpl" in the search box and press "Enter." Press the left arrow key to navigate over to the "Device Settings" tab. Press the tab key to reach the "Enable" button in this section. Press "Enter" on your keyboard. Press the tab key to reach the "Disable internal pointing device" check box. Press the space bar to remove the check mark. Put your finger on the touchpad, and move the pointer down to the "Apply" button. Click "Apply" to save the settings. Close the mouse "Properties" box. Press the keyboard "Windows" logo key to open the "Start Menu." Press the arrow keys on your keyboard to navigate to the "Shut Down" or "Turn Off Computer" menu. Press the up or down arrow key to highlight "Restart." Press "Enter" to restart your computer and attempt to use the laptop mouse as it should normally function. Open the "Control Panel." Go to the "Add and Remove" or "Uninstall" programs section. Highlight any secondary mouse devices in the list that you have installed for your laptop, such as an external USB mouse. Select the "Uninstall" option to remove any software and settings associated with this secondary mouse. Restart your computer and attempt to use the built-in laptop mouse as normal. Check to see if the mouse is working properly. Press the keyboard's "Windows" button to open the "Start Menu." Press the keyboard's arrow keys, "Enter" button and "Tab" to navigate to and open the "Control Panel." Go to the "Hardware and Sound" section, and press "Enter." Navigate to "Device Manager," and press "Enter" to open it. Find "Mice and other pointing devices from the list" and open its "Properties" dialog box. Select the "Driver" tab and choose "Update Driver." Allow Windows to search the Internet for drivers and to update them automatically. Restart your computer after the drivers are updated, and use your mouse as normal.
Beginners Guide to Using a Computer Mouse? Tips and Tricks
http://tips4pc.com/basics/beginners-guide-to-using-a-computer-mouse-tips-and-tricks.htm Laptop not working - touchpad unresponsive http://www.webdevelopersnotes.com/articles/laptop_touchpad_not_working.php

Apr 14, 2013 | Acer Computers & Internet

1 Answer

How do I navigate in the monitor's "Menu" of my HPw17e monitor?


There should be a couple of other buttons on the monitor possibly with a picture of an arrow visibly close to them. These buttons should provide navigation while in the menu. They made provide a different function while outside of the menu. For example a brightness button might increase the brightness of the screen but when in the main menu it might move up in the menu. The button has more then one function.

May 12, 2011 | HP w17e Monitor

3 Answers

I have a cordless panasonic kx-tg1031s ringer is off how do i get it on


To program the volume level of the handset, press the MENU button, then use the up or down arrow buttons to navigate to the HANDSET SETTING menu and press OK. Again using the up or down arrow buttons navigate to the RINGER SETTINGS submenu and press OK. Using the up or down arrow buttons navigate to the RINGER VOLUME submenu and press OK. Use the up or down arrow buttons to select the desired volume level and press OK. Press OFF to end. I have included a link where you can download the manual if you need it.


http://service.us.panasonic.com/OPERMANPDF/KXTG1031.PDF

Mar 25, 2011 | Panasonic KX-TG2740 Cordless Phone

1 Answer

Is there a way to access the tint function on the Apex4088? It is not accessable when we go into the picture setup menu. It appears to be locked.


Hello

The Tint function can be accesed by the following steps.

The PICTURE menu offers options to enhance and refine the picture displayed on your TV based on ambient room light and personal preferences. Adjustment options include contrast, brightness, color, sharpness and color temperature

Press the MENU button on the remote control. Navigate using t u arrow buttons to select PICTURE. Press the down q arrow button to highlight PICTURE MODE, then press the u arrow button to select your viewing preference from 4 factory options:
STANDARD > DYNAMIC > MOVIE > PERSONAL. The STANDARD setting is recommended for most viewing environments. Depending on the ambient light level in the room, you may find one of the other options more pleasing.

To make more critical adjustments based on your own preferences in PERSONAL:

• Use down q arrow button to highlight Contrast. Navigate using the
t u arrow buttons to increase or decrease contrast intensity.
• Use down q arrow button to highlight Brightness. Navigate using the t u arrow buttons to increase or decrease overall brightness.
• Use down q arrow button to highlight Color. Navigate using the
t u arrow buttons to increase or decrease color intensity.
• Use down q arrow button to highlight Tint. Navigate using the
t u arrow buttons to adjust colors toward green or reddish tint.
• Use down q arrow button to highlight Sharpness. Navigate using the t u arrow buttons to soften or view crisper edges in the picture.
• Use down q arrow button to highlight Color Temperature. Navigate using the t u arrow buttons to select COOL (more bluish tone), NORMAL or WARM. The default setting is NORMAL. WARM mode will provide color that is calibrated to D6500° Kelvin, the standard color that broadcast stations and the Motion Picture industry consider as the most accurate to view programming.
Note: When adjustments are completed, you may select another menu by pressing the Menu button.
OK


Jan 14, 2011 | Apex Digital LD4088 LCD TV

1 Answer

How to change chinese language apple mac to english


  • Press the "Menu" button to display the main settings menu on the LCD.
  • Use the left and right arrow buttons to navigate to Setup Menu 1, which has an icon of a wrench and a numerical "1" on the tab. Press the center of the controller
  • Use the up and down arrow buttons to highlight "Language" and press the right arrow button to display the options.
  • Use the up and down arrow buttons to highlight your preferred language, then press in the center of arrow buttons to apply the change
  • Nov 23, 2010 | Apple MacBook Mac Notebook

    1 Answer

    Volume Menu appears randomly; buttons 2-4 don't work reliably


    Once you can try providing "reset" option from the menu .... This will solve most of your problems ..

    Jul 25, 2009 | Hannspree 22" widescreen LCD Flat Panel HD...

    1 Answer

    W300i buttons 1,2,3 not working


    Call the voice box from a land line and it should prompt you to enter your mobile/PIN number.

    Feb 11, 2008 | Sony Ericsson W300 Cellular Phone

    Not finding what you are looking for?
    Sony Ericsson W300 Cellular Phone Logo

    57 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Sony Ericsson Cell Phones Experts

    Muntejaya Ginting
    Muntejaya Ginting

    Level 3 Expert

    10422 Answers

    Ekse

    Level 3 Expert

    13434 Answers

    Zaid Anarwala
    Zaid Anarwala

    Level 3 Expert

    457 Answers

    Are you a Sony Ericsson Cell Phone Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...