Question about Radio Communications

I have a red signal light that keeps blinking in gp328 any ideas?

I have a red signal light that keeps blinking in gp328 any ideas? when I turn on the radio the red light keeps blinking til I turn off the radio

1 Answer

eradiostore

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.
Radio Commun... Master
1,664 Answers

A blinking red light can be a sign of the radio picking up radio frequency waves (RF) on your same frequency or a nearby frequency. There may something transmitting in your area which is causing the blinking light, or you may have another radio which could be stuck in transmit. One way to check this is to take the radio to a different location and see if the blinking still occurs.

Next, the question would be, does the radio function otherwise correctly? If so, continue to use the radio and do not concern yourself with the light. If the radio does not function properly, they you should send it to a qualified radio repair center for service.

Best regards.

Posted on Sep 17, 2014

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

I have a Kicker CX300.1 connected to 2 12" kicker subwoofer and when i turn on the radio the amp keeps on at the red light, but once i turn on the ignition the green light keeps blinking and the red light...

bad amp. the blinking is an indication reading out a error code.

Mar 13, 2015 | Kicker Car Audio & Video

2 Answers

Error tone in gp328 plus radio

Generally due to power low. It may also be a PPL issue, this should be checked out by a radio repair shop. Did you get the set wet or damp?

Apr 20, 2014 | Radio Communications

2 Answers

Power light keeps blinking Red and TV will not turn on

Is the light blinking constantly or is there a long pause then more blinking. If constant check the lamp door switch . Usually it is broken or jammed. If you jumper it and the set comes on that it. 4 blinks is bad fan.

Mar 24, 2010 | Sony Grand WEGA KF-42SX300 42" LCD TV

1 Answer

Communication Between the GP328 AND GP339

you need to know what band is every radio, if are for the same band, then can be programmed to the same frequency.

Jan 10, 2010 | Radio Communications

2 Answers

Projector screen turns off after 10-20 seconds

Is the projector receiving a source signal? if not it will power itself down after whatever time you have it set to do so when no signal is present.
Just an idea?

Jan 03, 2010 | NEC NP-1000 Projector

2 Answers

RED POWER LIGHT BLINKS

Red power light blinks and tv will not turn on it is a 65h81 Toshiba HD

Jun 19, 2009 | Toshiba 65H81 65" Rear Projection...

1 Answer

Programming cable

The photo of the GP328 resembles the HT750 offered in the USA. If they use the same programming cable/equipment you would need the AARKN4074 Programming Cable, which requires a RIB (radio interface box) RLN4008.

OR you can use the RIB-less cable RKN4075. There is also a cloning cable available, part number RKN4073.

All of the above are offered on the assumption the GP328 and HT750 radio take the same cables. You might check with your local Motorola dealer to be certain.

May 31, 2009 | Radio Communications

1 Answer