An expert who has achieved level 3 by getting 1000 points
An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.
An expert that got 20 achievements.
An expert that got 10 achievements.
Re: How do I reset the color balance to default
Refer its user manual for details. How to set it the color to its default settings, is described by it. Try a reset too.
To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there is software cd along with printer u need to setup the software. if u installed it go to the main menu & find cartridge level. see if green is low. there are also utility like clean cartridge. use it. also reseat the cartridge. if nothing is working use new cartridge.
Someone probably played around with the "Tint" settings in the TV menu. The easiest way to fix it is to go into the TV picture menu and reset everything to the default settings. There's probably one option for "Reset to Factory Default" or something along those lines. Since every TV is different with this, you should read your owner's manual to find how to enter the menu and find the reset button.
Red = ground black = ground Grey/blue = Left rear (+) yellow/black = ignition 12v white/purple = right rear (-) green/black
= (could this be green / violet?) than it is 12v constant blue/red = illumination orange/green = left front (+) white/green = right front (-) blue/white = left front (-) brown/yellow = left rear (tan / yellow) (-) green/orange = right front (+) orange/red = right rear (+) blue = not used
Most aftermarket cd players have the following wiring diagrams
(+)Yellow...........12v battery (Memory) Constant Hot
(+)Blue.............12v Power antenna
(+)Blue/white.......12v Remote turn on
(+)White............Front left positive
(-)White/black......Front left negative
(+)Grey.............Front right positive
(-)Grey/black.......Front right negative
(+)Green............Rear left positive
(-)Green/black......Rear left negative
(+)Purple...........Rear right positive
(-)Purple/black.....Rear right negative