Display panel lights up--motor will not run

SOURCE: I need a manual for the proform 995 sel treadmill.

Hi there,
download manual from the link below
http://www.iconservice.com/cgi-bin/ncommerce3/ExecMacro/proform/manuals.d2w/report?lan=&match=exact&name=PFTL99600
sorry to say but there is no free manual on net, so you have to pay 9.69 buks to sownload the user manual.
Good Luck!!!

neo

SOURCE: My Proform 995 SEL treadmill changes speed

It turned ou to be a worn drive belt. Replaced and fine

John Mazmanian

• 832 Answers
• Posted on May 20, 2010

SOURCE: Proform 995 Sel treadmill

Go to iconservice.com click on manual input manufacturer & mode lname

ernesto cuadra

• 12223 Answers
• Posted on Feb 15, 2012

SOURCE: Proform 831 threadmill

Dear Sir:
You have a serious problem:
Do the following step:
1) Test the power from outlet wall.
2) Test it for ground in the outlet wall.
3)power cord test for loose cable.
4) Reset c.breaker from the treadmill
5)test the transformer for voltage input and output(primary and secondary ).
6)Power supply see if there are some component burn or loose wire or melt.
7)See if there are +5 Vdc for digital circuit(main motor board.(
8) Run the calibration software under the Hood motor is the instruction. for diagnose.
attached the block diagram.
sincerely.
ernesto cuadra
managua, nicaragua c.a.

ernesto cuadra

• 12223 Answers
• Posted on Apr 04, 2013

SOURCE: Proform L18 treadmill display doesn't work. Incline and speed switches work but no led display

see the diagram attached. Clean it. Test for open or faulty. Tight the connector. God bless you