Question about Sony VPL-EX5 Projector
My projector is not working there lamp/cover signal indicator blink but projector not run.
Posted by Anonymous on
Take the lamp cover back off. Check the mechanism that the projector uses to sense the door. It might be a small pressure switch. Check whatever triggers the mechanisms is still attached to the door and hasn't broken off.
Posted on Sep 16, 2014
After replacing lamp, connect projector AC power cord and turn the projector in standby mode.
Press following keys on control panel for less then 5 seconds each..
RESET, <==, ==>, ENTER.
That will reset lamp timer in projector.
Posted on Jun 01, 2009
definately a lamp problem, for some reason the projector doesnt seem to accept or recognize the new lamp and switches to "safe mode". usually the projector turns off before the bulb explodes...
Posted on Aug 04, 2009
Tips for a great answer:
Dec 11, 2014 | Sony VPL-BW5, VPL-ES5, VPL-EW5, VPL-EX5,...
Feb 25, 2014 | Sony VPL-EX5 Projector
May 21, 2011 | Sony VPL-EX5 Projector
Mar 01, 2011 | Sony VPL HS1 Multimedia Projector
Feb 22, 2011 | Sony VPL-EX1 Multimedia Projector
Feb 14, 2011 | Sony VPL-EX5 Projector
Dec 20, 2010 | Sony VPL-CX61 LCD Projector
Sep 29, 2007 | Sony VPL-ES3 Multimedia Projector
1,678 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: