Question about Ryobi Garden

Open Question

How to untangle inside the spool head ryobi expand it

I can not untangle the spool

Posted by Anonymous on

Ad

1 Related Answer

Anonymous

  • 155 Answers

SOURCE: can't get pull cord back on spool.

most clutch plates screw off the opposite way to which the engine runs

Posted on Jul 25, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ryobi bump head knob is locked, wont turn to remove. Any tricks?
I would recommend using something a bit more hefty like self adjusting locking pliers or even a plumbers' pipe wrench. If you can get the bump feed to free up, but it's out of trimmer line you may be able to manual spool it. Found a how-to vid on youtube that may be relevant to your model Ryobi trimmer -
Howto string Ryobi trimmer

Sep 13, 2018 | Ryobi Garden

3 Answers

How to replace the spool head
Once you remove the spool cap and the spool, you cannot remove the head from the motor. It is not a replacement part.
Ryobi P2002 Cordless String Trimmer Parts

Aug 31, 2014 | Ryobi Lithium Ion 18 Volt 18v Cordless...

0 Answers

Untangling a shimano sienna 1000

Aug 27, 2014 | SHIMANO AMERICAN CORPORATION Sienna 1000...

1 Answer

How do I get the old line trimmer spool off of my Ryobi 18 volt cordless trimer
When looking at the head, you will see to two gray rectangle pieces. Press them both at the same time between your thumb and forefinger and then pull. It should come unlatched and reveal the line spool on the inside

Jul 25, 2014 | Ryobi Lithium Ion 18 Volt 18v Cordless...

2 Answers

Ryobi problems
Be sure the spring is not bound up with grass or mud. It has to recoil to push the head down so the line doesn't continue to shoot out.

Aug 24, 2017 | Ryobi Garden

1 Answer

How to untangle window cable in 2000 buick lesabre passenger front door?
I have never done your year Buick, but if it is a metal cable I did help a friend with a BMW that had that system. I have a 1992 LeSabre service manual and it tells you to replace the assembly (typical GM solution)
I the cable is tangled, and kinked, it will fail again even if you get it back together. Again if it is like the BMW, there is a spool that the motor drives. the cable comes to that spool from two directions and each end winds in the opposite direction. So when one cable is wrapping on the spool, the other cable is unwinding, when you reverse directions, the cable does the same.
Hope this helps, have you done an internet search?

Jun 11, 2014 | 2000 Buick LeSabre

1 Answer

How to untangle letters to make words in Jumble Word Puzzle
Hello, You are going to have too use dictionary, google, or yahoo to help with untangling words.

May 26, 2014 | Video Game Consoles & Games

1 Answer

Automatic line advance not advancing on Ryobi 18v trimmer
I have a Ryobi Model RY28040 straight shaft line trimmer. In my case I replaced the complete String Head Assembly that includes the String Head Housing, Spring, and Spool and the string still did not advance. I then discovered that the bolt in the Spool Retainer cap (the red cap that attaches the spool to the shaft) was fused and not moving. The bolt needs to be loose inside the cap in order to allow the spool to move in and out by the spring. I loosened the bolt and fastened the spool back onto the shaft. Fired it up and bumped it a few times and the line began to advance. Turns out I probably only needed to replace the Spool Retainer rather than the String Head Assembly.

Apr 03, 2013 | Ryobi 18 Volt 18v Cordless String Trimmer...

1 Answer

Control seems to be frozen mid wash cycle. Paused the wash cycle to untangle drum contents. Control seems to be frozen. No response to any buttons. Showing error message "Sud". How do I get it to
Model number?

Jan 19, 2013 | Washing Machines

0 Answers

Rope tangled around shaft, came off of the spool.

Oct 15, 2017 | Troy Bilt Tb70ss Gas Trimmer

Not finding what you are looking for?

View Most Popular

Garden

Related Question

Ryobi bump head knob is locked, wont turn to remove. Any tricks?

  • Ryobi Garden

Open Questions:

0 Answers

Ryobi strimmer The bump head keeps falling off when starting

Sep 25, 2019 | Ryobi Garden

0 Answers

My Ryobi 40 volt 4ah string trimmer will run for about 30 seconds and quits. Let off button and push again, it starts again. However, it never seems to reach full speed. Help

Sep 17, 2019 | Ryobi Garden

0 Answers

my cordless Ryobi easy edge 18v trimmer quit working batteries are charged but nothing happen when I pull the trigger can this be fixed

Jul 25, 2019 | Ryobi Garden

0 Answers

I have a Ryobi RM480e and having blade difficulties. One of the two blades (left side) is not spinning. There is no debris. The battery is charged and the right blade works fine. When the blade height is set to its highest, the problematic blade wants to start but doesnt to its full potential. When lowering the blade height it doesnt work at all. Tou can hear and feel the blade trying to kick on but eventually doesnt This causes both blades to stop working after a minute or two. Any ideas of what the problem is??

Jul 24, 2019 | Ryobi Garden

Garden Logo

Related Topics:

386 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

12 Answers
My Ryobi weedeater engine keeps stalling out.

Ryobi Garden

1 Answer
What is the Gas /Oil Mix Ratio on the Ryobi Tiller

Ryobi Cultivator

13 Answers
Ryobi gas trimmer SS26, won't start hot

Ryobi Garden

2 Answers
How do I adjust carb on a ryobi weedeater

Ryobi Factory-Reconditioned ...

1 Answer
Battery charge not charging with the Ryobi 40v

Ryobi 40-Volt Lithium-Ion...

Top Ryobi Garden Experts

bryan st

Level 2 Expert

123 Answers

Tim Venetis

Level 2 Expert

260 Answers

john h

Level 3 Expert

23515 Answers

Are you a Ryobi Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
RHT2660DA.PDF. user-manual-Rht-2660DA...

Ryobi Rht-2660DA...

PDF Manual
Manual. user-manual-Factory...

Ryobi Factory...

Loading...