Question about General Electric Microwave Ovens
WANT TO REPLACE the current microwave, but want to fill the space over the stove.
Posted by Anonymous on
Determining the cubic feet of any given appliance, Microwave, Oven, Freezer or Refrigerator is quite simple.
Follow these steps.
Open the door of your microwave and measure the length, width and height in inches of the interior cavity.
Multiply the length by the width by the height using a calculator to get the total in cubic inches.
Divide the cubic inches by 1,728, which is the volume of a cubic foot. The resulting number will be your microwave's measurement in cubic feet. You can also use an online conversion calculator to simplify matters
Hope that helps
Posted on Oct 28, 2014
It is a good possibility that the stirrer has failed. In the top of cabinet is a round cover,there is a small round plug in the edge of it,pry plug out and put it in safe place,rotate the cover < twist locks > gently let it down and stirrer will be either setting on cover or still attached. If you notice any damage< it is a round aluminum disc that is flat > then you need a new one. If you don't see any damage put it back in < put in hole and turn until you feel it line up with shaft and push into place,< gently >.Make note of position and put cover back on < stirrer does not lock on shaft so you have to hold it up until you get cover under it in most cases. Run a short cycle and remove cover to see if it turned at all. If not the motor is bad < turns stirrer during operation>. This is the first time that question has been asked of me and it is the only thing that I can think of if it heats glass and not food.
Posted on Apr 22, 2009
The magnetron is overheating, and the magnetron thermostat is tripping, interrupting power until it cools back down.
This is to protect the magnetron from being destroyed from overheating.
It may be that the internal cooling is not occurring or the magnetron is failing. Cooling can be compromised by:
- failed or failing internal cooling fan
- blocked air inlet or filter
- outer cover not installed correctly
There should be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting, & testing.
At our Web site, we have a video available showing how to remove a typical over the range control panel assembly in under 5 minutes.
You can find links to helpful exploded view diagrams and part ordering help here.
I'd recommend that your bookmark this link to your favorites.
We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.
Posted on Feb 10, 2010
Testimonial: "Thank you -I decided to replace the mic. By the time I pay $75 just to send someone out, + labor & parts to repair I found a replacement GE for $199"
Please read the solutions in below website.Check all the things listed in below website.If still problem persists then you need to call for service
In this there is a topic called as No heat but otherwise normal operation.Check in that topic
Posted on Oct 22, 2010
Tips for a great answer:
Jul 29, 2014 | GE Microwave Ovens
Oct 29, 2013 | GE Microwave Ovens
Jan 28, 2013 | Microwave Ovens
Sep 27, 2011 | GE Spacemaker JVM1640SJ Microwave Oven
Sep 18, 2017 | Kenmore 62702 Microwave Oven
Mar 27, 2009 | GE Spacemaker JVM1640SJ Microwave Oven
Feb 04, 2009 | GE Spacemaker JVM1640SJ Microwave Oven
Jun 03, 2008 | GE JE1540 Microwave Oven
Dec 05, 2017 | General Electric GE Monogram Advantium 240...
123 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: