Question about HP LaserJet 3050 All-In-One Printer
Posted by Anonymous on
The printed page comes through the hot fuser at the top of the printer, through the exit rollers an end up in the exit bin.
We cleared a massive paper jam out of the fuser, by removing the grey surround on top of the printer. The plastic hooks that hold it in place get broken in the process, then you will the jammed paper between the fuser rollers, and the exit rollers. A technician can do it for you, but is unessersarly costly.
Posted on Dec 23, 2008
SOURCE: jam in bin
this is a common fault. look where the paper was jammed, you may need a torch. There is a black or white sensor there that has been dislodged. Once clipped back into place it will then report to the printer that the paper path is clear and no longer a jam.
Posted on Oct 05, 2009
my experience says jamming in duplex area using card stock. this may occur if default is duplexing. set default to single side and / or try same job using plain a4 80gm2
Posted on Mar 31, 2010
Tips for a great answer:
Sep 06, 2013 | Minolta QMS PagePro 9100 Laser Printer
May 14, 2008 | HP Color LaserJet 2600n Printer
Jun 15, 2011 | HP Color LaserJet 2600n Printer
Nov 21, 2010 | HP Laserjet CM 1312NFI Color Printer
Jan 28, 2010 | HP Color LaserJet 2600n Printer
Oct 20, 2009 | HP LaserJet M4345 MultiFunction Printer
Dec 21, 2008 | HP Color LaserJet 2600n Printer
Jul 08, 2008 | HP Color LaserJet 2600n Printer
106 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: