I have a tatung tv 32inch and i turn it on it just give me snow flake

If the power /freezer is set the blue snow flake remains lit.
How do use the digital control panel on my Samsung fridge freezer

to turn off for normal operation and power save push and hold power/freezer button for 3 seconds.

If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/
Line, faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent.

the warning light you describe is for "frost warning"(potential icy conditions)DRIVE CAREFULLY.

Hi jcbd,
Did you get any solution so far?
I encounter the same probleme with my TV now
Please let me know what you did,
Thanks

By jcbd on Mar 10, 2010

I have a Vision Quest 32inch PVQ-32VGB and the some of the channels have locked and the factory password of 0000 does not work any suggestions? thanks

I don't know ... but I will say that when I have encountered a snow flake on a auto display, it has meant (in the cars I have driven) the air conditioner is turned on.

It may mean something else in your fiat.

Thanks for your interest in FixYa.com

Snow flake then use the time clock to organise on/off times

i assume that your connection between tv and dvd is using an rf modulator. that means you dont have video input in the tv. if this is the case, set the tv channel to channel 3 or 4. let us know.

Also have a TATUNG P42SMT. Problem is the screen starts to turn green shortly after turning it on, then the screen goes black.

Two things may be at play here. The tv might be only programmed for reception on channel 2 and will need to be re programmed to receive other channels.
Also try some basic troubleshooting on the remotes. Start with the remote that came with the tv. Replace the batteries try the "MENU" button. If you can get into the menu try to "autoprogram" the TV

www.polaroidsupport.com/polaroid/docs/FLM-3001ServiceManual.pdf