Question about Epson Stylus CX3200 All-In-One InkJet Printer

Open Question

Epson cx stylus 3200 scanner error

Error light is on scanner error

Posted by Anonymous on

Ad

5 Related Answers

myob247

Georgia B

  • 1342 Answers

SOURCE: Epson CX 3200 - twain error scanner not recognized

Click HERE for a troubleshooting guide

Click HERE for drivers and documentation

Posted on Jun 01, 2008

Ad
Inky

Inky Fingers

  • 705 Answers

SOURCE: Epson Stylus CX5400 Scanner

If the lamp is not working their are two main possibilities. The first is that the lamp has failed and needs to be replaced. Buying a replacement MAY be dearer than buying a new machine - you will have to price the parts locally.

The second option is that the controller board for the scanner has gone. Again this could be an expensive part, but contact a local repair center or parts supplier to price the bits.

If you are successfull in getting the parts (you may buy a faulty machine off ebay with good scanner and bad printer to strip parts from) then this service manual will help you get to the parts you need:

http://www.tradebit.com/filedetail.php/814420-Documents-eBooks-Technical

Posted on Sep 19, 2008

Ad
chazman05

Chaz G

  • 48 Answers

SOURCE: I NEED MANUAL FOR REPAIR EPSON STYLUS CX-3900

http://tech.epson.com.au/downloads/message.asp?platform=winxp&techtips=techtips&EmailAdd=&MetricIDReturned=2694589&submit=Search+%3E%3E&sCategory=Multi_Functional&id=styluscx3900

Copy and paste link in browser then download the user manual.

Posted on Dec 16, 2008

Basti

Edgar Allan Pagayona

  • 1447 Answers

SOURCE: Cartridge holder does not move to

Hi

have you tried pressing it down for 3 seconds? on the printer utility on your computeris there an option to change cartridge? pls check that, if all fails then that's a hardware issue. call epson for replacement.

Hope this help

Posted on Dec 20, 2008

Anonymous

  • 1 Answer

SOURCE: no installation cd for epson stylus cx 3200

I don´t have de CD, can you help me, plis?

Posted on May 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Epson 610 Workforce Printer Error; Light Bar won't reset


Sound like the scanner is the issue, is it under warranty? OR the Scanner may be locked, check for the scanner release device unlock it,.

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/normanj_7893313f0751935f

Dec 17, 2012 | Epson Workforce 610 All-In-One InkJet...

1 Answer

Red error light on vupoint magic wand scanner


Viewpoint scanner manuals are available for download: http://www.vupointsolutions.com/downloads.php?d=manuals

Unfortunately I still can't get my red error light to turn off!

Jun 28, 2012 | VuPoint Office Equipment & Supplies

3 Answers

HP Laserjet 3330. Scanner bulb warming up doesn't go away. I have done the "solution 1" as discribte but nothing is happening. It goes like: - i put the power on, hewlett packard is flashing, the...


How does the bulb look? Is it bright or kind of dim. The bulb warming error is designed to halt use of the machine until the scanner bulb reaches the correct output level. As these are basically a flourescent tube, they will dim over time and at a certain point they will not generate enough light to enable proper scanning. If the bulb is dim, it will require replacement.

Mar 14, 2011 | Office Equipment & Supplies

1 Answer

HP-2727mfp scanner error problem


HPM2727mfp - Scanner Error 5 - Scanner Error 8


These errors indicate a problem with the flatbed scanner assembly. The flatbed is no longer able to initialize or find home position. The scanner may move back and forth continually and the light flicker at a high rate of speed. The flatbed scanner will need to be serviced/changed. The part required is CB532-67905

M2727SCANNER


Please contact your local Hewlett Packard Repair Center.

HPPARTNERLOCATOR


I hope this has been of assistance. prefab_17.jpg

Jan 02, 2011 | HP Laserjet M2727nf Multifunction Printer

1 Answer

The error light on the scanner is flashing but the manual does not say anything about a flashing error light. What is wrong with the scanner?


I am having the same issue. It still scans, but the light will not go out. Did you ever resolve the issue?

Aug 18, 2010 | Panasonic KV-S1025C

1 Answer

Modle 5222, scanner error?? any suggestions?


sure you lamp lights up when machine is powered on. open the top cover, turn power on. lamp should light and scanner should move. if either of these do not happen you will need to replace parts. if the lamp lights and the scanner moves your ccd could be bad. you may need a service tech. if the lamp does not light it is your problem. lamp, power supply, ballest, or main pcb could be the problem

Oct 21, 2009 | Lanier 1205 Copier

2 Answers

Error 8 in scanner i40


try to open it, there will be small short mirrors under black plactic covers, remove that thin covers and clean the mirror well and put it back. it has to remove the E8 error

Jun 30, 2009 | Kodak i40 Path-Through Scanner

1 Answer

Hp laserjet3030 is put on it shows" Scanner Error"


Hi ritaccpl: Here is your problem. 52 Scanner Error The all-in-one has experienced an internal hardware error. 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. If a surge protector is being used, remove it. Plug the all-in-one directly into the wall socket. 3. Check the FFC connection between the formatter and the scanner. NOTE Do not bend or fold the FFCs during the removal or reinstallation process. 4. Try connecting the product to a different power source or surge protector. 5. Turn on the power and wait for the all-inone to initialize. 6. If the error persists, replace the laser scanner assembly. Hope this helps

Jun 08, 2009 | HP LaserJet 3030 All-In-One Printer

2 Answers

Error 3200 and no light from scanner Lamp on Kyocera FS-1118MFP


this error belogs to Exposure lamp problem ? cause of this error 1. Defective scanner PWB. 2.Defective exposure lamp or inverter PWB. 3.Incorrect shading position poor . 4.poor contact of the connector terminals Solutions:- 1. Replace the scanner PWB and check for correct operation. 2. Replace the exposure lamp or inverter PWB. 3.Adjust the position of the contact glass (shading plate). If the problem still occurs, replace the scanner home position sensor. 4.Check the connection of connector YC7 on the scanner PWB, and the continuity across the connector terminals. Repair or replace if necessary.

Mar 24, 2009 | Kyocera FS-1118MFP Laser Printer

Not finding what you are looking for?
Epson Stylus CX3200 All-In-One InkJet Printer Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Cindy Wells

Level 3 Expert

6133 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...