Question about Akai LCT2660 26 in. HD-Ready LCD Television
Can you suggest a source for replacement inverter pcb for Akai LCT2660?
Either internet or dealer/service center in Omaha, NE.
Do you still have this TV?What does it do?Not power on?Power on,and then off again?You shouldn't have to replace the whole board,unless either it is beyond repair,or you don't have one to start with.I just got done fixing an Akai LCT2660 that had four bad capacitors on the power board.Works perfect now.Hope this helps.Thank You very much!
Posted on Feb 02, 2008
Tips for a great answer:
Zero-crossing signal problem
• The main PCB does not detect the zero-crossing signal (Z CROSS SIG) for the time specified below.
Poor contact in the connector terminals. - Check the connection of connectors YC1-3 on the main PCB and YC2-6 on the power source PCB, and the continuity across the connector terminals. Repair or replace if necessary.
Defective power source PCB. - Check if the zero-crossing signal is output from YC2-6 on the power source PCB. If not, replace the power source PCB.
Defective main PCB. - Replace the main PCB if C6400 is detected while YC2-6 on the power source PCB outputs the zero-crossing signal.
Dec 18, 2010 | Kyocera Mita KM-5035 Printer
Apr 13, 2009 | Akai LCT2660 26 in. HD-Ready LCD...
Aug 01, 2008 | Akai LCT3285TA 32 in. LCD Television
Oct 14, 2007 | Akai LCT2660 26 in. HD-Ready LCD...
Jul 10, 2020 | Sharp Televison & Video
Jun 05, 2020 | Panasonic Televison & Video
100 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: