WILL NOT TURN ON THERE IS NO PICTURE
SOURCE: Horizontal lines on Samsung Plasma
Sounds a lot like the Power supply board. But you have to check it out further to be sure. Email me back and we'll chat. GURU JAY
SOURCE: Samsung HP-T4264 will not autoprogram, locks up on
Reset to factory specifications by turning tv on, and then using the remote, hit power off, mute key, 1, 8, 2, and power on. Interval between key strokes is less than 3 seconds. When tv comes back on it shows Service Mode Display, key up to reset and press enter. Was able to autoprogram without any problems.
SOURCE: I have a Samsung HP-T4264 plasma tv with a badly
No way, Jose!
Those bastards manufactures are always making sure you won't be able to use parts from one model to the other. Especially-display! LCD panels could be rigged, but no plazma's. Sorry!
Sell it for parts to some repair shop and get yourself LCD or LED panel. Plazma is gone!
SOURCE: my 3-year old samsung hp-t4264
Defective and/or bulged capacitors on the power supply board.
67 views
Usually answered in minutes!
×