How do you put the filter back in a Krups BW750 kettle, the holder has come off the kettle

can you give me more info i cant under stand what is the modle

Sounds like a faulty internal thermostat or it needs to be adjusted.

" just recently bought my krups kettle and last week "

TAKE IT BACK AS DEFECTIVE FOR EXCHANGE OR REFUND

Buy a new one. Take the defective one, repack it in the old box and return it with the new receipt. Av a cup o tea.

This is a known issue with Krups kettles. If you are a handy person then you can remove the base and use a high temp gasket maker (auto shops have it) to add to existing silicone seal which goes bad after a couple of years.

Unfortunately it's unfixable. A few recent Philips models do it as well and it's worst in hard water areas. Basically the cause is that a tiny bit of water gets into the bottom seam each time the kettle is used and leaves a residue behind when it dries out. Over time, the residue builds up and forces the seam apart so the leak gets worse.

All you can realistically do is hope that it's still under warranty and demand that Krups replace it, preferably with a different model. If they won't then you may have to exert whichever consumer rights exist in your country, but one way or another you need to stop using your kettle (it's dangerous!) and replace it with another.

You cannot fix it when they split like that.

go to krupsusa.com customer service

That is from your dripp stop. If you can replace it it will be in the bottom of your filter holder. If not Please tkae out the valve on the bottom of this filter holder. You will have no dripp stop but it will work just fine.