How to disable the email alert - LG Vu CU920 Cellular Phone

If you want to use your Bang & Olufsen (B&O) headphones as an intercom only, without any phone-related functionality, you can try the following steps to remove the "no dial tone" alert:

1. Disable the Bluetooth and/or cellular data connections on your B&O headphones and/or mobile device, if applicable.
2. Check the user manual or settings menu of your B&O headphones to see if there is an option to disable or customize alerts or notifications. If so, try to find and disable the "no dial tone" alert or any other phone-related alerts.
3. If you cannot find an option to disable or customize the alert on your B&O headphones, you may need to use a third-party app or tool to block or filter the alert. For example, you could try using a call blocker app that can silence or redirect calls and notifications.
4. Alternatively, you could try to physically disconnect or remove any phone-related components or cables from your B&O headphones, such as the microphone, speaker, or charging cable, if possible. However, this may affect the functionality or quality of your headphones as an intercom.

Keep in mind that removing the "no dial tone" alert or disabling phone-related functionality on your B&O headphones may affect their warranty, compatibility, or safety. Therefore, it is recommended to consult the manufacturer or a qualified technician before making any modifications or repairs to your headphones.

It depends on which mail program you are using. You should be able to disable the alert right in the panel of management of that mail program. Usually you might see a small icon in the system tray which is the bar at the bottom right corner of the screen for that mail program and you can right click on that and choose options or something and disable the alert. Give me more details and I will let you know the steps.

The following instructions are for the T289, which is very similar to the T250. It is possible they will work to turn off your beeps.

Alert Tones

The Alert Tones (beeps) on the Talkabout radios are set at a fixed volume

level and cannot be lowered. However, Alert Tones can be disabled. When

Alert Tones are disabled, the radio will receive messages at the volume

setting you've selected, but you will not hear beeps when you press control

buttons.

Disabling Alert Tones:

1. Hold down the Monitor button while you turn radio on.

2. To re-activate Alert Tones, turn the radio off, then on again while holding
the Monitor button down.

Here is a link to the user guide: http://www.motorola.com/mdirect/manuals/T289_User_Manual.pdf

open internet options go to advanced tab
under browsing
mark the option disable scriptdebugging

Don't know why you would still be getting the email alert signal if you have discontinued the service. There shouldn't be anything coming into your phone to activate the signal. In any case, if you go to your setup menu, there should be a section to enable/disable or turn off this alert. It may be under "web services" if your phone has that section. Sometimes you have to look in "Initial Setup". Hope this helps. Please rate as helpful if it does help. Thanks.

what kind of email you on.? if its hotmail then you can go into settings and click 'alert me when i have a new email'
=]

function noCTRL(e)
{
var code = (document.all) ? event.keyCode:e.which;
var ctrl = (document.all) ? event.ctrlKey:e.modifiers & Event.CONTROL_MASK;
var msg = "Sorry, this functionality is disabled.";
if (document.all)
{
if (ctrl && code==86) //CTRL+V
{
alert(msg);
window.event.returnValue = false;
}
else if (ctrl && code==67) //CTRL+C (Copy)
{
alert(msg);
window.event.returnValue = false;
}
}
else {
if (ctrl==2) //CTRL key
{
alert(msg);
return false;
}
}
}

When you are in Mobile Email and logged into your mail service, under OPTIONS there is an option to change EMAIL ALERTS. At least it is for Yahoo. I am assuming it would be the same or similar for other email services.

Go to the Menu and scroll to "alerts" or "alams" and disable it.