- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
HP no longer provides support for drivers for this printer. The newer Windows OS will support the printer natively, but sometimes it requires a little finesse from the user. Here is a link to an HP forum where folks tell how they worked out the communications issue for the print and scanning functions. Hope this helps! adding hp psc 2410 printer to windows 7
Make sure you inserting the paper not deep inside just insert and stop it when you feel any resistance .and try to print something. If it is print then well otherwise you have to show it service center.
HP PSC 2410 PhotoSmart All-in-One Q3087A, Q3088A, Q3089A
HP PSC 2500 Series PhotoSmart All-in-One Q3094AR, Q3094A, Q3095A
HP PhotoSmart 7900 Series Printer Q3020AR, Q3020A, Q3021A, Q3022A, Q3023A, Q3024A Q3090A
For HP 0957-2094 PhotoSmart 2410, 2510, 5510 Printers and much more.Come with power cord. Power Rating: 32V 940mA and 16V 625mA Note: Amps and Watts are maximum load tolerance. Devices only draw as many Amperes or Watts as they needed
For purchasing you might also contact this link below: http://cgi.ebay.com/Adapter-For-HP-0957-2094-0950-4466-32V-940mA-16V-625mA_W0QQitemZ250414311173QQcmdZViewItemQQimsxZ20090427?IMSfp=TL090427149005r21586
I found this suggestion on line and it worked. After turning on my hp psc 2410 photosmart all in one, it just started making a peculiar sound and wouldn't boot up. It was useless. What I did to correct the problem (as per suggestion from [email protected]) was to hold the cancel button down before I turned the printer on and hold it down through the start up process. The thing works now. The problem may have been caused by a power outage. Thanks [email protected] I almost bought another printer.