Question about KDS Valiant 671DP Notebook
I have a
KDS Valiant 671DP And im trying to find a tear down manual on the notebook . I need to know how to take out the HDD as its gone bad..
First step: lay the screen fully down, then pry the two speaker covers outward. You may have to move the screen around to get them out.
second step: lift the center section containing the power button upward.
third step: loosen the two small phillips screws that hold the keyboard on.
fourth step: gently lift the keyboard up. There is a ribbon cable that plugs into a socket. There is a liftable tab on either side of the socket. Gently pry them up to release the ribbon cable and thus the keyboard.
fifth step: The hard drive is now visible. It is held in by three screws: one on the left and two on the connector. Once these three screws have been removed you can lift the drive out.
Take the old drive out of the holder and remove the connector. Install connector onto the new drive then secure into the drive holder.
Remainder of assembly is reverse of disassembly.
You may need to pry the ribbon tabs up to ensure that the ribbon cable seats down fully. Once the ribbon cable is down, push down the tabs to lock the keyboard in securely.
hope this helps.
Posted on Nov 18, 2007
Tips for a great answer:
Jan 15, 2010 | KDS Valiant 671DP Notebook
Dec 28, 2008 | KDS Valiant 671DP Notebook
Oct 29, 2008 | KDS Valiant 671DP Notebook
Mar 26, 2008 | KDS Valiant 671DP Notebook
Nov 11, 2008 | KDS Valiant 671DP Notebook
185 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: