Question about Sony VPL-ES7 LCD Projector
The remote will turn the projector off and on.
Posted by Anonymous on
Have you connected the USB cable to your laptop so that the Sony remote can act as a mouse? Did the laptop respond by loading drivers?
Posted on Sep 11, 2014
change the screen resolution to 600x800,and switch to other monitor by hitting fn+F6 key (Laptop).if the screen get black use alt+Ctrl+F3 to switch it on .
Posted on Dec 15, 2008
According to the manual, you need access to the RESET button, the left and right arrows and the ENTER button to clear the counter. Press the following in order for less than 5 seconds each:
The above sequence should clear the counter.
Posted on Apr 09, 2009
After replacing lamp, connect projector AC power cord and turn the projector in standby mode.
Press following keys on control panel for less then 5 seconds each..
RESET, <==, ==>, ENTER.
That will reset lamp timer in projector.
Posted on Jun 01, 2009
does the "lamp/cover"-led light up? i had the same thing happening, the lamp either broke or is about to break and the projektor won't turn it on again to protect itself. if its very urgent, open the projector pull the lamp out and put it in again, it might work for 1 or 2 more times, but it is very likely to explode (usually not breaking the projector but for sure not good for it).
Posted on Aug 04, 2009
Tips for a great answer:
Nov 09, 2016 | Sony VPL-ES7 LCD Projector
Mar 02, 2016 | Sony Office Equipment & Supplies
Jun 29, 2015 | Sony VPL ES7 SVGA 800 x 600 LCD projector...
Mar 10, 2014 | Sony VPL-ES3 Multimedia Projector
Feb 18, 2014 | Sony VPL-ES7 LCD Projector
Mar 23, 2011 | Sony VPL-ES7 LCD Projector
Jun 12, 2009 | Sony VPL-CX85 3000 Slide Projector
93 people viewed this question
Usually answered in minutes!