<!-- from fixya rte -->How to do i put a pasword on wifi - NetGear WGR614 Wireless Router

If you have a main home pc . Go into settings and find the NETWORKING & SHARING file .
You can add a new Wifi name or password to the router that way.
You may need to go through the START button on bottom left corner of the screen on your PC to find the Network info. Normally WEP .( use about 10 letters and numbers )

If you want to reset your wifi so you need to press wifi reset button click on it and hold about 20 seconds.

in labtop you'll see that kind of bar in the left low corner of the screen like phone signal bars there click and see what comes out whene you see your wifi's name click in it and type your pasword

I have forgot my Qmobile e786 pasword want to remove my pasword and put new one what to do

Its very illegal to perform hacking wifi just as it is hacking a pc. what you need is a 4gb pin drive and your own wifi hacking program application. I dont know how to do it but thats just the materials you need. be careful what your going to do. The law is, as long as that person paid for the internet bills and you use their internet as much as them, you have to pay 5x as much. and they can sue you for it to top it off.

Hi. There's a security key to the wifi were you are connecting. You need to ask the owner of the wifi what's the security key. You need to input it before you can connect to the wifi

the default wifi passkey is usually printed on the label stuck to the router. you can login to the router using admin admin with a lan cable connected pc start a browser and enter 192.168.1.1 into a browser to get the menu up. you can then alter the wifi passkey value to whatever value you prefer. ALL Wifi signals have a PassKey by default so you must have entered it at some stage to the working devices.

I need master password of wifi

Try taking the battery out and see if it will clear the old password so you are able to put in a new one and then write the new one down somewhere.

You need to configure the entire connection manually. i.e. you need to put all the IP address, DNS address , Gateway etc and then only it will connect to the internet.