Question about Garden

1 Answer

It will run for a while then cut off john Deere

It will run for a while then cut off john Deere x34)

Posted by Anonymous on

Ad

1 Answer

charles beach

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Renaissance:

    An user who is expert in 3 categories / brands.

  • Master
  • 1,917 Answers

CHECK GAS FOR WATER THEN CHECK MAKE SURE GETTING GAS CHECK PLUG WHAT DO THEY LOOK LIKE WHEN CUTS OFF DOES IT LOOSE SPARK REPLACE COIL IF DOES 80.00 IF NOT GETTING GAS REBUILD CARB ALSO CHECK FUEL FILTER BAD THING ABOUT TRACTORS IF YOU LEAVE THEM OUT SIDE UNCOVERED THEY WILL GET WATER IN GAS ALL OF THEM SO DRAIN GAS OUT PUT IN NEW ALSO DRAIN CARB OUT ALSO CHECK OIL LEVEL IT HAS A OIL CENSOR ON IT THAT REEDS OIL LEVEL IF OIL LEVEL NOT SAFE THEN WILL SHUT IT OFF TRY THIS LET ME NO WHATS HAPPENS THE RED NECK

Posted on Sep 03, 2014

Ad

1 Related Answer

Anonymous

  • 1 Answer

SOURCE: john deere runs then stops

I fixed my mower stalling issues on the L111 by loosening the gas cap. I ultimately drilled a hole in the gas cap and screened the hole. Sounds ridiculous but without that venting the engine would run approximately 20 mins and die. It was also much more difficult to start the next time. Something else to pass along to whomever might view this... I replaced the cranking battery with a battery that had allot more cranking amps and I no longer had hard start issues ( this was after I vented the gas cap). Hope this helps.

Posted on Aug 11, 2009

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a new windows 7 laptop and want to install my printer hp deskjet f380 so i can scan but dont no what software to download


You will have to go to the HP website and find the driver download's. Make sure you choose the right driver to download based on what type of HP Printer you have and the type of Windows 7. There are 2 versions x34 and x64. Since windows 7 is so new much of the softwares we are currently using are not compatiable with Windows 7 operating system and will cause them to either stop working or stop responding.

May 07, 2010 | HP DeskJet F380 All-In-One Printer

2 Answers

No display and trying to find resistors.


SYMPTOM: No Display.
COUNTERMEASURE: Re-solder the following components on PCB X34-415:
R43, R44, R46, R47, R48, R49, R50, R51, R55, and R57


They all say 2r7 on them

Jul 27, 2008 | Kenwood KDC-X590 CD Player

1 Answer

Kenwood cd player kdc4060ra


SYMPTOM: No Display.
COUNTERMEASURE: Re-solder the following components on PCB X34-415:
R43, R44, R46, R47, R48, R49, R50, R51, R55, and R57.

Ok so if you remove the top of the unit and cd player down the right side you see a line of surface resistors that say 2R7 on them, they all need to be resolders to the bord theres 9 total.

Jul 14, 2008 | Kenwood KDC-X590 CD Player

1 Answer

Display is OUT but everything functions....... what to do?


SYMPTOM: No Display.
COUNTERMEASURE: Re-solder the following components on PCB X34-415:
R43, R44, R46, R47, R48, R49, R50, R51, R55, and R57.

Ok so if you remove the top of the unit and cd player down the right side you see a line of surface resistors that say 2R7 on them, they all need to be resolders to the bord theres 9 total.

Jul 13, 2008 | Kenwood KDC-X590 CD Player

1 Answer

NEED HELP


SYMPTOM: No Display.
COUNTERMEASURE: Re-solder the following components on PCB X34-415:
R43, R44, R46, R47, R48, R49, R50, R51, R55, and R57.

Ok so if you remove the top of the unit and cd player down the right side you see a line of surface resistors that say 2R7 on them, they all need to be resolders to the bord theres 9 total.

R43 is the circut number. They say 2R7 On Them

Jul 12, 2008 | Kenwood KDC-X590 CD Player

1 Answer

LCD Screen Out?


COUNTERMEASURE: Re-solder the following components on PCB X34-415:
R43, R44, R46, R47, R48, R49, R50, R51, R55, and R57.

Ok so if you remove the top of the unit and cd player down the right side you see a line of surface resistors that say 2R7 on them, they all need to be resolders to the bord theres 9 total.

Jul 09, 2008 | Kenwood KDC-X590 CD Player

2 Answers

Hey did u find the curcut # on the kenwood kdc-x590 if so pleas let us know !!! thanks for ur time


Are you talking about the circuit that lights the display? If so, you need to resolder the surface mount resistors in the front right corner on the top of the board. Front right while facing unit with top off and CD deck out. you will see a series of surface mount resistors and they all are connected in series. All of them need to be resoldered. That will make the display work again.

Jun 11, 2008 | Kenwood KDC-X590 CD Player

Not finding what you are looking for?
Garden Logo

Related Topics:

44 people viewed this question

Ask a Question

Usually answered in minutes!

Top Garden Experts

Dennis Key
Dennis Key

Level 3 Expert

2481 Answers

john h

Level 3 Expert

23515 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...