Office Equipment & Supplies Logo

Related Topics:

A
Anonymous Posted on Aug 31, 2014

<!-- from fixya rte -->Green light flashes 8 times - Canon Office Equipment & Supplies

1 Answer

Avi Tuchman

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 5 Answers
  • Posted on Sep 01, 2014
Avi Tuchman
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Sep 01, 2014
Answers
5
Questions
2
Helped
1377
Points
5

IF THIS IS A PIXMA IP2000, then
Eight flashes = Waste ink absorber* almost full. The printer has a built-in waste ink absorber to hold the ink consumed during Print
Head cleaning. Eight flashes indicates that this absorber is nearly full.
Press the R R ESUME/CANCEL button to clear the error so printing can continue for a while.
A longer term RESET IS possible BUT without changing the blotters, you're exposed to ink eventually running out of the printer without warning but... if you still want to continue, here are the reset instructions. Good luck!
1) With the printer powered off, hold down the resume button and press the power button.
2) While holding down the power button, release the resume button and press the resume button twice in succession. Now release the power button. The indicator will blink in green and remain lit in green.
Now press the resume button 4 times and then the power button. You've just reset the waste ink counter. Good luck. Just hope it doesn't come back to bite you!

1 Related Answer

Anonymous

  • 83 Answers
  • Posted on Apr 05, 2011

SOURCE: When i turn the printer

Try this one:
http://www.usa.canon.com/cusa/support/consumer/printers_multifunction/s_series/s520#ServiceAndSupport

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Mobility scooter mayfair 8 green light flashes 9 times

You have two 12 volt batteries for a total voltage of 24 volts. Your green light is blinking because your total voltage has dropped to about 16 volts at the controller. If the connectors to the battery are not loose, perhaps there is a problem with one of the batteries.
0helpful
1answer

How do fix my 5 inch sony the light flashes 8 times

Prior to this were you getting a bright red, green, or blue screen with trace lines?
0helpful
1answer

Orange light flashes 5 times then green flashes once then repeat Can't get printer to do anything else. Have unpluged it for ten minutes no luck Have removed print head and replaced it, no luck....

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal.For printer
2helpful
1answer

Screen turns green and small red light on front flashes 8 times

to me this is pointing towrd a bad (possibly shorted)green crt tube. howerver other possiblilities could be bad hig voltage distribution block(g2) 8 flashing means high voltage error. or an error on the d cuircit board error
0helpful
1answer

Turn tv on,picture good for 4 seconds,then green curved line like a rainbow all green,then 4 green sequence flashes,picture goes out theN volume continues for 2 seconds then out front red power light then...

This is a set with bad picture tubes-not available except on rebuild basis.

Are you seeing bright green screen and then set shuts off?

Let me know so I can help--8 blinks is AKB error.

SD TECH
1helpful
1answer

When I switch on my i550, The green light comes on , immediately changes to orange which flashes 8 times, reurns to green, flashes orange again. This process repeats ad nauseambut the thing will not print

8 times says the ink absorber is almost full and should print if you press the resume button. If it's too full it won't print until the absorber is changed and the counter reset thru the service mode.
1helpful
1answer

My old canon S400 is not printing anything. Trying maintenance checks but still will not print pages. The on off light flashes yellow 8 times follwed by 1 green light flash. What is the problem?

1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not, press the Power button once more.
8. Your printer should respond as normal


All the best Pineworks
0helpful
1answer

Flashing lights

Canon IP 2000 / reset
1. Turn off printer
2. Hold down Resume button and press Power button.
3. Keep holding down Power button and let Resume button go.
4. Press Resume button 2 times then let BOTH buttons go.
5. Green lights will flash and then stop blinking.
6. When green lights are solid, press the Resume button 4 times.
7. Press the Power button and the printer should turn off, if not,
press the Power button once more.
8. Your printer should respond as normal..
Not finding what you are looking for?

69 views

Ask a Question

Usually answered in minutes!

Top Canon Office Equipment & Supplies Experts

old marine
old marine

Level 3 Expert

2426 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Cindy Wells

Level 3 Expert

6688 Answers

Are you a Canon Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...