Manuals free 4 prong cord to plug into my Troy-bilt generator to hook up my camper

need to know the KVA or KW rating of the set

sounds like the spring on the governor or carb came off and went wide open. that will lock an engine up quick. pull the spark plug and see if you can turn the engine over. if you have to take off the shroud that covers the flywheel, pull rope assembly. try to turn the engine over by hand. squirt some oil in the spark plug hole. you may be able to free it . the starter cord should be free off the engine. maybe it just got jammed.

Wiring diagram (link below) and a link to Troy Manuals PDF Manual Web Archive - requires serial number to access

A good site for manuals or seeking of Free User Manuals and Owners Guides ManualsOnline com

See this webpage for manual:

http://www.hammerwall.com/Manuals/Troy-Bilt/Description/030247-0/Troy-Bilt%20Portable%20Generator%20Operators%20Manual/030247_0esCw/

You will probably have to buy an adaptor. Read the owners manual for the generator, the 4 prong should only be for 240V. The 3 prong should be 120V. But READ the owners manual. If it is this way you should be able to get an adaptor at your local hardware/electrical supplier or any RV store.

I got this free Pdf manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

i have a chipper too, and it started giving lot of problems 4 yrs ago, so I got this manual from reliable-store for free and I don't think Ive visited a mechanic or fixya for help for more than 3-4 times out of the 20 times I fixed the chipper in these 4 years

Try taking the shroud off of the motor and and cleaning the magnets on the fly wheel. Also clean the two little prongs next to the fly wheel. You can also clean the end of the spark plug cable that hooks onto the plug. I use fine sandpaper or emery cloth.

Good Luck
roundo4

I have a Troy bilt 7800 13500 generator. It has maybe 40 hrs on it. And It stopped working. I took it into a shop to have it fixed. Repair cost would be $1000.00 I paid 1200 for it. Shop said the 3 main parts of the generator were fried. The Generator was bought in 2005 and only like 40 hrs on it and it is dead. Troy bilt will not help out with the repair because it is to old, yet it has no real run time on it. Now the generator is just a paper weigh