LG front load washer says LE on the desplay

https://removeandreplace.com/2017/05/03/lg-front-load-washer-ee-error-code-how-to-repair

An LE error code on the washer's display indicates that the motor is locked, possibly due to a heavy wash load. Large and heavy sized loads will put a strain on the motor, causing the LE code to occur. Performing a reset on the washer will normally resolve this error with a reduced load size.Apr 25, 2018

Watch following videos to fix the problem:

https://www.youtube.com/watch?v=fKA3MGOLMHE LG front load washer LE code fix

https://www.youtube.com/watch?v=jrBKF1QzE0M LG Washer LE Error Code Easy Fix Part 1

In new installations, this error can sometimes present because of a miscommunication between the control panel and the wash motor. In this instance, the washer simply needs to be reset.

Step 1: Unplug the washing machine.

Step 2: While the washer remains unplugged, press and hold the [Start/Pause] button on the front panel for 5 seconds.

Step 3: Plug the unit back in, and run a rinse and spin cycle to test if the LE code is cleared.

OVER SUDDSING

Hi,
Here is a tip that explains what the LE error code means.....

LG Washing Machine LE Error Code or Fault Code
heatman101

Hello,This a common problem for all front loaders. Your washer will not drain or work 'cause your outlet filter is clogged. Usually this small door is on the left side front below of your washer. Expect some water to come out when you open the door, etc. Clean out your filter and refit.....things should be fine.

Thanks

I have a LE error on my front load washer and it won't start, how can I fix it?

A majority of the time when the LE code appears.. the Hall sensor in the motor is bad. Replacing it. Part # 6501KW2002A from MCM electronics... can help. Good luck.

LG recommends unplugging the washer for 15 - 20
minutes to reset the microprocessor.

The most common cause for the LE error code is over-sudsing in the machine from using regular detergent instead of a high efficiency detergent. The HE detergents are designed for lower suds levels and enhanced cleaning performance in front-loading washers.

Overloading the wash with too much laundry may also cause the LE error code. LG recommends loading the washer until the clothes in the drum are no more than three-fourths of the way up the window of the door. This will allow them sufficient room for tumbling.

http://tclaundryrepair.com/

try unpluging for 45 seconds than hold in the selector knob for 10 sec. & plug back in

LE is a locked motor error. Not to worry as 95% of the time it is just a bad hall sensor (the motor position sensor). For your model the part number is 6501KW2002A.

You can order parts by your location by CLICKING HERE