Question about Samsung LN Televison & Video

My samsung was hit by lighting.. the red light blinks a few times when i plug it in. and when i press power it blinks once. but will not turn on. i checked the two fuses inside and replaced them but i

Red light blinks for about 30seconds when plugged in. after that it will blink each time I press a button on the remote.. screen does not come on or even flicker. and no sound.

1 Answer

The Knight

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.
Samsung Master
76,466 Answers

Fault with main board. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/

Posted on Aug 24, 2014

5 Related Answers

Anonymous

2 Answers

SOURCE: lamp out maybe

my tv did the same thing and since I was getting it to work most of the time I didn't do anything until the lamp went out alltogether. If you also get a warning that your lamp needs to be replaced, you better get one. You can get them pretty cheap on EBay and on the web if you google them. Approx. $140 if you search maybe less. From Panasonic it is over $550. It was easy to replace but still cant get the lamp timer meter to reset in mine. Good luck with itl.

Posted on Jul 04, 2008

Anonymous

1 Answer

SOURCE: No Picture or sound

The lamp cover door was not secured tightly. Door does not "push" shut easily. Got a little rough with it and latched it shut, then the tv worked fine.

Posted on Jan 28, 2009

Anonymous

1 Answer

SOURCE: Sharp Aquos LC-37HV4U red lights stay on and will not turn on

same problem...need help

Posted on Jun 12, 2009

Anonymous

1077 Answers

SOURCE: Set will not power on.. Blinks red LED 8 times

It's a power supply related problem.
The flashing 8 times is a trouble code. A Service Manual for your TV model will have the info on the codes. It could be a bad capacitor or a transformer on the power supply board.If you have some electronic experience, you can find a Service Manual for your TV over the internet. Cost about under $20.

Posted on Jul 31, 2009

John Bloomfield

534 Answers

SOURCE: Red light blinking three times in a row

Service manual says 3 flashing red leds = eeprom error (main digital / video pcb).
Suggest you start by implementation of Fujitsu Service Bulletin PDP 0068-01 Main Digital pcb see:-ttp://www.eserviceinfo.com/download.php?fileid=43450

Posted on Aug 21, 2009

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Samsung TV not turning ON. My email address is prk Please help... Much appreciated.

Its power supply I will tell you how to fix you need to get few things first

Jan 29, 2016 | Samsung Televison & Video

2 Answers

LED TV Wont Turn on, just shows red indicator light

dead power board

Dec 10, 2015 | Sceptre E465BV-FHDD 46" 3D LED TV...

1 Answer

Red light blinks six times. When I hit power button green light stays on for a few seconds, turns off the on for a few more. Then goes back to pattern of red light blinking six times.

the kill switch is open ensure the lamp cover presses firmly on the kill switch when u close the lamp chamber door the red light will stop blinking and u can now turn the tv on

Jul 06, 2013 | Televison & Video

1 Answer

I need to program my telus remote to turn my 46"

Press and hold TV, then OK at the same time. Let go of TV and OK, top buttons should quickly blink red then stop press the code 1019 then hit the bottom right button marked ENTER or OPTIONS
Remote should now work with tv.
To control volume and power at the same time... Press and hold STB and OK at the same time, let go, red blinking up top enter the code 977 STB should blink red a few times.
Hit STB, see if TV volume adjusts Hit POWER. see if both STB (Set Top Box) turns off and TV turns off.
All should be good.
If both TV and STB do not turn on/off, repeat the process for the code where you enter 977

Jan 29, 2011 | Samsung LN-T4661F 46 in. LCD HDTV

1 Answer

I have a Kitchen Aid 5 speed blender. After turning it on, the red light blinks, then after choosing a speed it works, but when I hit the OFF button nothing happens. I hit the PULSE button once to stop it...

Hiya,

Sorry to hear you are experiencing an issue with your blender. We believe that the described issue indicates control board fault.

If you have KSB555, please follow the link below to show you how to replace this part on your appliance.

https://www.kaparts.co.uk/Help/KitchenAidHelp/KitchenAidBlenderHelp/HowtochangetheControlBoardonaKSB555/tabid/650/Default.aspx

https://www.youtube.com/watch?v=Lafh8UGn4No

Hope you found this useful :-)

Aug 22, 2017 | KitchenAid Kitchen Aid Kitchenaid 5-speed...

1 Answer

Sharp Aquos LC-37HV4U red lights stay on and will not turn on

same problem...need help

Jun 12, 2009 | Sharp Aquos LC-32GD4U 32 in. LCD HDTV

1 Answer

I lost my sylvania remote and bought an RCA universal remote

hello here is how you get your remote to work...make sure tv is on
step 1.hold down code search button till you see the red light
step2. let go of code search button and hit TV once light should blink
step3. press and release the power button while pointong a TV u ((may have to press the power button several times)) once the Tv powers off press the enter button once
step4. press tv button and hit power

Mar 07, 2009 | Zenith DBZN-311 Remote Control

2 Answers

No video or sound, just blinking power light

make sure tv not in standby mode

Jan 18, 2009 | Toshiba 46H83 46" Rear Projection...

1 Answer

Need codes for a AKARI 14" color TV IC-1494RAK

1. Turn TV on
2. Press TV key on remote.
3, Press and Hold magic button until red light blinks twice, it will blink once and then twice.
4. enter 991 red light will blink twice
5. Hit the power button
6. Aim the remote at the TV and press the channel plus button until the TV turns off.
7. Hit the magic button as soon as the TV turns off to store the code.

Hope this works for you!

Jan 03, 2009 | One For All URC 7740 Remote Control

2 Answers

TLP2848Z blinking red, will not print

1: Is it a TLP2844 or a TLP2844Z.

Operationally they are completely different printers. TLP2844 uses ELP (Eltron Programming Language. but TLP2844Z uses ZPL (Zebra Programming Language). You need to calibrate the printer to the labels.

Calibration:
If its a TLP2844. Load media. Connect power.
Hold down feed key, power on, count one, two, release feed key. The printer will go through a calibtation routine and print config label. IMPORTANT - When it prints this label you must press the feed key and see the message OUT OF DUMP. Your printer will now be calibrated. Check this by hitting the feed key a few times and printer will feed one label each time feed is hit.

Calibration:
If its a TLP2844z.

Load media. Turn printer on and wait for green light (Approx 1 minute)
Press feed key and keep it pressed until green light blinks once, then twice, now release feed key.

Dec 22, 2008 | Zebra TLP 2844-Z Thermal Label Printer