We bought a sony svr1000 nd we got the display one minus the remote we bought a tuneable remote will they work on this nd can we by a remote from sony

Try these codes. 0056 0057 0055 0034 0129 1055. If you wish to get more details, check the sites linked here. Setup code list, and setup procedure to many popular brand remote controls are given.
http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Time slide, can be selected by the drop-down list, at the top left of the display window, will make surf easy.

May be the settings vary from one model of AC to another . In case of Voltas vertis premium AC ( Indian make ) , after turning it to OFF , pressing the MODE and " - " ie minus button simultaneously , the C and F could be shifted . This info is printed on the back of the remote itself .

Hello
Standby light on Sony TVs blinks 16 times is abnormal I thiks. It may come up to 8 blinks or so. You jsut switch off the set by AC mains switch at the front panel, switch it again with it and count the exact numbers. Never switch it On_Off by remote hanset.
If it happens even after this process, you just do the following
Press the following button on your remote control as stated
"Display"_"Channel"_"5"_"Vol Minus" [not plus] then "Power".
You may get "OVP" "OCP" "V STOP" etc displayed on the screen.
Just report the result to me through Fixya. Ok.

w200i display light not working

It means that something in the power section has failed,and the system goes into standby (safety) mode.Could be a fuse,resistor,or IC.Does it blink? On your remote you could press display,channel,5,volume - (minus),then power,for the diagnostics,.....for service mode press display,channel,5,volume + (plus) then power,press 8 then enter

http://www.docs.sony.com/release/CDXFW570.pdf

This is your manual. The button on your remote is called "att" short for antenuation. Instead of "mute" Gotta love Sony! re-invent the wheel. Hope this helps

Sounds like the remote may have been dropped or has just gone bad. Contact the manufacturer for a replacement or you can try and post a thread in the electronics section for help on repairing the remote.

Hi i have a similar problem but instead of the audio its the colors
reds look purple oranges look kinda tan blues look green etc please if you have the factory values for my model tv which is
kv32fv300 please post them up thank you!

5 blinks means problem in the AKB (video) and 4 blinks means problem with the verticle deflection. Try this to get the screen to display any recent faults then get back to me and let me know what it said. Press the following buttons on the remote.
Display, Channel, 5, Vol Minus, ( Not plus ) then Power. This brings up
a screen with a list of the problems and number of times they have occurred.
Each of the problem names is abbreviated as, "OCP", "OVP", "V STOP", ETC.
We have repeated them in parentheses in the text for the "Blinks" described
above so you can correlate between the diagnostic screen and the blink
codes.

if the remote makes it work and it plays ....if all functions work other than display check for bad solder joints on the display pay  attention to the ones on the corners if the unit is or was a tight fit in the dash its possible that the unit got a little stress and broke loose from the board .... if there is a white powder look in the display it probably bad... the silvery black in the corners is normal