Question about Electric Mobility Health & Beauty

1 Answer

Merits DL 52 i electric wheel chair, all leds flash 3 times as a error code. Battery is fully charged, then turn on wheelchair. All led are on. then when the joy stick is pushed, all leds flash 3 time

Dynamic DL 5.2i controller Model #DL50UEHS3 All LED's flash 3 times and pause, and flash three times and pause etc.

Posted by John E Heintz Jr on

Ad

1 Answer

Ryan Brockman

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Contributor
  • 34 Answers

Make sure the manual brake isn't down.

Posted on Aug 22, 2014

Ad

1 Related Answer

HoverTech

Donna Angelo

  • 232 Answers

SOURCE: Merits DL 52 i electric wheel chair, all leds flash 3 times.

The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

Posted on Oct 20, 2010

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I charging my electric wheelchair a DL 5.2i. when is changing completed?


On this controller there is a 6 light LED display above the battery icon which is below the horn button. Turn on the power chair with the 1/0 button and the LED display will light up. The lights are red on the left, yellow in the middle and green to the right. If all 6 lights are lit the chair is fully charged. Hope this helps.

Nov 18, 2016 | Electric Health & Beauty

1 Answer

Why is my merits DL 5.2i stuck in low speed ?


You may have a thermal rollback issue. Try charging the chair overnight and leave the controller on while charging. This will give the control module/joystick time to reset themselves. Thermal rollback happens when a certain temperature in the motors is reached. The system shuts itself down to protect from damage.

Apr 26, 2014 | Select Jazzy Used Electric Wheelchair

1 Answer

Shoprider power chair won't move and 8 Battery LED Lights are flashing


Code 8: Controller problem. Also, check to see if your gearbox levers are engaged - if you can roll the chair by hand the gearbox is not engaging the motors.

Mar 20, 2013 | Pride Mobility Products New Pride Mobility...

1 Answer

Merits wheelchair 2 center flashing lights when turned on


Flash Code 2 indicates that the voltage is too high or too low. Check batteries and cable connections. Charge the batteries. If this fault occurs during battery charging, the charger is defective or not adjusted correctly. Empty batteries will charge. Dead batteries will not normally charge.

Feb 26, 2013 | Electric Mobility 24 " Seat Merits Heavy...

2 Answers

I purchased a Pronto 41 wheelchair and a Winsunny battery charger. The charger didn't have a manual so I'm wondering what the best procedure is for recharging the batteries. Do I need to turn the...


Joe See my tips on charging batteries No you don't have to leave the chair on when charging. Charge overnite after using it during the day. Always have the charger off when plugging it into the chair and unplugging from the chair. The charger you have doesn't have an on/off switch so get a power strip with the on/off switch, plug that into the wall and plug your charger into the strip use the switch on the strip to turn the charger on and off this will save you having to plug and unplug the charger rom the wall. Always store or put the chair up fully charged. If you don't use the cair daily charge at least once a week. It takes 9-10 chargings to get the batteries operating at 100% so use the chair and charge overnight while you sleep Never leave the charger on the chair more than 12 hours Hope this helps you

May 30, 2011 | Electric Mobility Pronto M41 Power Chair...

1 Answer

Merits DL 52 i electric wheel chair, all leds flash 3 times as a error code. Battery is fully charged, then turn on wheelchair. All led are on. then when the joy stick is pushed, all leds flash 3 times...


The number of lights that are blinking indicate what the problem is. Visit this site to locate the type on controller on your power chair and you will be able to see that the blinking lights mean:
http://www.pgdt.com/scenter/diagnostics/diagvsi.html
Try to reset your manual brake release as this is a common problem.
If you continue to have a problem, contact your manufacturer or dealer for service. If your insurance purchased they power chair for you, they may also cover the cost of repairs.
Good luck!

Jul 15, 2010 | Health & Beauty

1 Answer

Upon power up, 3 red LEDs flashing rapidly continously, no power.


The control systems on power mobility equipment have a "prevent" circuit that immobilizes the equipment while it is plugged into a charger, so folks won't take off with it plugged into the wall outlet. When you turn it on when plugged into a charger, the display will flash constantly, or sweep constantly, depending on the manufacturer. This is normal. Your off-board charger should have a red light to indicate power to the charger, and another light for the charge status. Yellowish means it is charging, when it turns green, you are fully charged. If the status light is green all the time, that is an indication that the charger is not functioning properly, or that the batteries are below a chargeable state. Check charger output, which should be 26-28 volts dc, and each battery should show at least a 12 volt reading, but around 13.5 volts with a full charge. If one or both of the batteries drops below 12 volts after a short period of time, it's time for a fresh pair. Fully charge new ones before using the chair.

May 31, 2009 | Pride New Jazzy 600 Power Wheelchair by...

1 Answer

Led lights flash and Pride Go chair won't move.


Firstly disengage the drive levers and then "flick "them in fash.
Second pull out the large plug that is between them.
Check for damaged or bent or loose pins. press it home firmly .
I did this on my wifes chair and she zooms around.
All switched etc should be off during charge.

Lastly i fully discharged then recharged the battery to ensure no "battery charge memory".
To fully dicharge i shoved a small box between back wheels so to lift of ground and then a elastic band to hond controler on.

Jan 11, 2009 | Pride Go Chair Travel Power Chair

Not finding what you are looking for?
Health & Beauty Logo

Related Topics:

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Mobility Health & Beauty Experts

Rob Hill
Rob Hill

Level 3 Expert

1414 Answers

The Knight
The Knight

Level 3 Expert

76416 Answers

Brad Brown

Level 3 Expert

18455 Answers

Are you an Electric Mobility Health and Beauty Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...