Washing Machines Logo

Related Topics:

Question about Washing Machines

1 Answer

What means c1 on aeg oko lavamat 74500

What means c1 and how can i fix it on a aeg oko lavamat 74500 update?

Posted by sindre storslett on

Ad

1 Answer

Piotr Pachkaev

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 306 Answers

Hello!

Error C1 on AEG Lavamat usually means that there is a trouble with water filling. The required water level is not reached.

I reccomend you contact your local Service
Force Centre.

Here is the link to a manual of a similar AEG Lavamat waching machine (a "trouble shooting" part). Hopefully, it will help!
http://manualsbrain.com/ru/manuals/1793433/?page=30

Posted on Jun 23, 2017

Ad

5 Related Answers

SOURCE: AEG Oko-Lavamat 86820 Update Error code C9

Hello. I got error code C9 on a LAVAMAT 86800. It pumped in water, and it pumps out water. You can select pump in or out....But the motor dont turn. It will not sentrifuge. So I bought new carbon brush'es on the net. One of them were totally wore down. Now it works. They lasted for 10 years.

Posted on Feb 05, 2010

Ad

Anonymous

  • 57 Answers

SOURCE: oko lavamat 74640 update showing error E20 what

its a draining error, check sump, pump and drain hose for blockage failing that it needs a new pump.

Posted on Mar 31, 2010

Anonymous

  • 174 Answers

SOURCE: aeg oko lavamat 72600 update, ce error code

error code ce is a faulty water distributor fault . you have to replace the top part of the soap dispensor compartment. sometimes you can hear a clicking noise when its trying to operate

Posted on Jul 20, 2010

Testimonial: "Cheers thanks very much, washer now working, great help"

kapishtech

raj somaiya

  • 2272 Answers

SOURCE: AEG OKO LAVAMAT 72630 is showing E20. what does

Error code E-20 means drain problem. It means that the machine is not draining water correctly. Check the drain hose, to see if it is kinked or folded over. It could also be that the drain pump or drain hose are clogged. Drain the pump (check behind the little panel at the bottom right of the machine), first draining via the small emergency drain hose if you want to avoid a large puddle.
Also get the fluff filter removed and checked.If the filter is clogged then it will not let the water to get drained. The fluff filter is behind the little trapdoor below and to the right of the drum on the front of the machine. Open the door, unscrew the filter, and pull it out. It will be covered in smelly slimy multi-coloured fluff, which you need to remove. When you remove the filter, there is a good chance that a fair bit of water will come out at the same time, so, if you can place a very low bowl or similar below the filter before you unscrew it it will save you from having to mop the floor. You can get required parts from www.repairclinic.com
Thanks. Keep updated for any more query. You can rate this solution and show your appreciation.

Posted on Aug 28, 2010

Anonymous

  • 3917 Answers

SOURCE: AEG Washing machine Oko Lavamat

Hi,

The C9 on some AEG LAVAMAT models like the 71400, 72600,74620, 86720 and possibly others, is the same as the above F9, and is usually MOTOR BRUSHES WORN OUT. After replacement, you will need to clear the fault indication held in the PROGRAMMER PCB logic: With the Switch in the OFF position - Press and hold PRE-WASH and SOAKING buttons in at the same time, then turn the control knob to Short Spin. Wait one or two seconds and all the indicators should illuminate. Then turn the control knob to OFF. All the indicators should go out. Then try and use your machine as normal. This should clear the C9 error code. If it does not -check there may be another fault present.

Please get back to us if you have further query else please accept the suggestion.
Thank you for contacting fixya.com

Posted on May 29, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

AEG OKO-LAVAMAT 86760 UPDATE 6KG C1 on I blew the 2 pressure tubes-clear Water supply strong Start again-just water from spin cycle out What to do next

C1 - means that in prewash cycle no water inlet, valve does not open/ interruption or flow rate too low.
So I suggest to you following: check water inlet, clean sieve, check inlet valve, check pressure sensor and finally check wiring.

Dado
0helpful
1answer

Have a aeg oko lavamat 88730 update runs for short time then shows C1 what is wrong with it and how do I fix it and how much

C1 is fault in prewash cycle and means no water inlet.
Could be: vaIve does not open or interruption, flow rate to low.
So, I suggest to check an following parts: water inlet, clean sieve, inlet valve, pressure sensor, wiring.

Dado
0helpful
1answer

How can I correct error code 25 on an AEG OK-LAVAMAT 74640 update washing machine mean?

Family error code "E20" means difficulties in draining, but I never heard for error code E25 on this model. Could be : E21, E23 and E24 error code.

Dado
3helpful
1answer

I have a AEG oko-lavamat 75520 update. It stopped and the code C9 showes on the display. What does the code mean, and is this something I can fix my selfe?

Hi Mrs Willems from retired Englishman in SW France,

According to my list, AEG Lavamat 8*** Series Onwards C9 stands for 'tacho fault' (monitoring the motor speed) requiring a service engineer's attention I suggest. Sorry ;-0(

If this has assisted and/or clarified the situation for you please consider a 4 thumbs up on our rating.
Thanks and good luck!
John C
8helpful
1answer

Oko lavamat 74640 update showing error E20 what does this mean?

its a draining error, check sump, pump and drain hose for blockage failing that it needs a new pump.
3helpful
2answers

AEG 72640 stopping mid-cycle no error code showing

I have the same problem with my Oko Lavamat 74639 Update. I've tried changing the vacuum sensor, but no luck.
Did you get your fixed?
Olafur
2helpful
6answers

Aeg oko_lavamat 508- not enough water

Have law level water problem in my clothes washing AEG Lavamant OKO 508.
0helpful
1answer

Need the manual for Aeg oko lavamat 74630

Dear Biyo,

Please download the manual from here. (simply press left click)

http://www.manualshark.org/manualshark/files/5/pdf_10516.pdf

I have sent you an email as well.

Regards,
EngineerGR
Not finding what you are looking for?

603 views

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

Brad Brown

Level 3 Expert

19166 Answers

W.L.

Level 3 Expert

2511 Answers

Are you a Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...