Question about Konica Minolta Copier Toner, DI-3010, 3510303A

1 Answer

Showing line in printing

What draw line in copier paper

Posted by patience on


1 Answer

Konica Minolta Error Codes and Solutions

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Expert
  • 210 Answers

Are the lines white (no toner is printing on that area) or black (too much toner is printed on that area)? In the first case, you might have dirt on the developing unit, the best bet is to replace the developer and before cleaning the developing unit. If the second case is you case, you might have a broken drum (scratches on the green drum that you'll see while the right door is open) or the charging unit might be dirty; in these two cases, you should replace the drum unit. The same black lines appears if the fusing roller is scratched, in this case you should replace it. Just drop us an email at [email protected] and we'll assist you further.
Konica Minolta Error Codes & Solutions -
Drum, Transfer Belt and Fusing Unit Firmware Reset -
Drum and Toner Chip Reset -
Transfer Belt and Fusing Unit Reset Kit -

Posted on Aug 21, 2014


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

J01 error when printing from d

Are sure the paper in the draw is in the same orientation as you are selecting on you computer in the print properties landscape in in draw and portrait on the computer will not work or vice a versa. Using bypass tray or paper draw? Check the guides in each draw snug up against the paper?

Btw, I’m available to help over the phone in case u need at

Jun 01, 2014 | Minolta Di152 Laser Printer

1 Answer

How to print 11x17 konica c203

place the 11 x 17 paper in draw number one ensure op screen display the paper properly, at printer properties select 11 x17 paper select draw one and print

Btw, I’m available to help over the phone in case u need at

Apr 09, 2014 | Konica Minolta Bizhub c203 Copier

1 Answer

Missalignement problem! Printing or copy-ing, my dialta di520 is not printing in center (off centered)... is starting to print at 7-8 mm from one long side and 6-7 from the short one. If i print / copy a...

First is this a problem with just one draw? Move to a different draw. lets eliminate the draws and or the by pass tray. Does this happen when using the Document feeder. Place the original on the big glass does it happen then? Secondly have you the correct size paper are you using metric size paper and the machine thinks it is inch size paper. Have to let the copier know what country it is in. Does this happen when you print or when you copy? Check the guides in all the paper draws they have to be snug up against the paper

Btw, I’m available to help over the phone in case u need at

Aug 23, 2013 | Minolta DiALTA Di520 Laser Printer

1 Answer

Cannot print,always shows out of paper, it does not take paper from cassette1(inside cassette)

the is going to be with the paper detect sensor or the lift up system when the paper is put in the draw also take the draw out and make sure no paper is fallen down the back of the inside of the machine

Jan 25, 2011 | Toshiba e-Studio163 Copier

2 Answers

Two day ago i managed to print on a Konica Minolta Di1611, and now it's giving me "PRN ERR" message and "LOAD suitable paper", even though I'm using the same type of paper. I tried to...

is the driver set correctly with the type of paper you have loaded in the draw also when you select the the job to print is it correct in the properties showing the correct type of paper and what draw it is taking it from

Jan 08, 2011 | Minolta Bizhub Di1811p Copier

1 Answer


when the print-out shows lines or streaks on the back of the paper when printing single sidedly, this usually means that the fusing unit is dirty or broken. another possible broken part may be the photoconductor unit.

Apr 20, 2010 | Canon iR 2016i Black and White Copier

1 Answer

The prints show horizontal lines offset.

Do you have a copy of a drawing and a photo of the resultant print that you can send to me at [email protected] as there could be several reasons for this. Also what software are you using on the iMac?

Nov 13, 2009 | HP Officejet Pro K8600dn Color Printer ...

1 Answer

Two lines show on my 5x7 prints

If the machine has mainly printed 6x4,When you
go to print 7x5 the edges of the head and rollers
tend to be dirty and will leave the two stripes along
the edge of the prints.Use the cleaning ribbon and the
sticky pad supplied with a new box of paper to clean the machine.Depending on how bad it is it may take a few try's.To do this switch the machine on and enter the control panel by tapping twice on the top left of the monitor- It will ask for a four digit code - Uless it has been changed this will be 9999 click
Enter/Ok - then click on the top far right ikon and
the screen you see will have a greyed out ikon
bottom middle - Now replace the print ribbon with
the white cleaning ribbon supplied with the machine
and the greyed out button becomes active - Click on
this button and the machine asks if you want to clean
it click Enter/Ok - About 10" of paper will then be
driven from the machine place the sticky pad as per
the drawing on it onto the paper and press Enter/Ok
- The paper will move in and out a few time and then eject a big piece and some small pieces of paper - Then remove the white cleaner ribbon and replace with the print ribbon and press the green return button
in the bottom right of the screen to return to normal use.This should be performed every two - three boxes
of paper.

Jan 21, 2009 | Sony SnapLab UP-CR10L Digital Photo...

Not finding what you are looking for?
Konica Minolta Copier Toner, DI-3010, 3510303A Logo

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6958 Answers


Level 1 Expert

51 Answers

George Mclaughlin

Level 2 Expert

369 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides