Question about Smith Corona Wordsmith 100 Typewriter
When typing my return button will not work on the Smith Corona SC110 typewriter. The carriage is stuck at right side position of the typewriter, how do I get the carriage to return to the left side?
Posted by Anonymous on
Make sure the right hand platen knob is tight hold the platen and turn the knob top toward the back of the typewriter until it is tight
Posted on Feb 21, 2015
the lift of tape has a dull side and a bright side make sure the dull side is toward the paper then press and hold the code key and the = key to reset the typewriter also see page 6 in the owners manual
Posted on Oct 29, 2007
Does the platen move or does the paper not advance? Check the paper release lever to make sure the feed wheels are snapped in place. If the platen does not move something in the paper feed motor area.
Posted on Aug 13, 2008
The print head might have accummulated a lot of paper bits you need to clear them with a needle or just submerge the tip in petrol or ether. Caution do not submerge if its made of plastic.
Posted on Jun 21, 2009
Tips for a great answer:
Sep 01, 2014 | Office Equipment & Supplies
Aug 18, 2014 | Smith Corona Office Equipment & Supplies
Aug 18, 2014 | Smith Corona Wordsmith 100 Typewriter
279 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: