E260 player won't read some songs

i will surely help you. you have mentioned that you can see all the songs when your mp3 player is connected to the computer. so what you can do is, you can very well go ahead & format all the songs in your mp3 player using your computer. then you transfer a few songs to your mp3 player(the songs which were not getting recognized in your mp3 player). this should solve your problem.   

umm dude if u have the disks and stuff install them.
ummmmm also sync is to put the songs on the player like save them on their.
also try using windows media player, in the top right corner it will say ur device name, then fill in all the songs below it(so copy and paste).
and then sync them.
good luck dude.!

From what I'm hearing you don't have a good driver. If you still have the disk use that. If not google it or something. I have a Sansa e260 as well so I would suggest loading the songs on in windows media player rather that windows explorer. If you open Media Player and then go to sync and it does not recognize your device, then you have a bad driver. If not, then start syncing your songs that way.

Hope everything works,

Fixer Guy

http://www.sandisk.com/sansa/#/support-0/

go to Sansa e200 series for the software

The Sansa is unfortunatley one huge mess up the programming has failed its working on a database with only 4 levels but for grphics and songs you need at least 7 lhopefully you can return it and get another if not you can try putting another type of chip hopefully that will work

Call sandisk tech support at 1-866-726-3474 or email [email protected]. I know I bought one of these as a refurbished unit and it came with no manual. They were very helpful when I had trouble with mine.

change the mode of the player to MSC from Mtp MODE AND SEE
GO TO SETUP AND ENTER usb MODE AND SELECT msc I THINK THAT SHOULD solve your problem

The issue you have described with your portable device in most cases can be resolved by formatting your device. Please follow these steps even if you have already attempted them once before.





Please note that this will remove all music from your device.





Formatting the device in Windows Media Player





1. Open Windows Media Player with your MP3 player connected to the computer





2. At the top of windows Media Player select the Sync tab at the top





3. The MP3 player should be recognized on the right hand side and say "Your Player Name"





4. Above the player name is a button that says "Format Storage Media" click this button to erase all the data from the player





5. Continue with the acknowledgement of erasing all data on disk.

i had the same problem. all i did was format it and reload all of my songs and now it works perfectly. hope this works for u 2!!!!!

ok push the power botton and the play botton at the sametime for a while then it should turn of turn it back and it should be just fine and if it is not try it again hope it helps.