How do I set the time on my Baume Mercier Rivera watch

It may be that the crown needs to be unscrewed before being able to pull it out.

Try turning the crown anticlockwise about 1/4 of a turn, then pull.

I presume that you are winding the watch 24 hours to change the date.

You can shorten the time it takes to change the dates in the following manner:-

Wind the watch until the date changes, then turn it back until it passes 12 again and then turn it forward. Each time it passes 12 the date should increase by a day.

You may have to experiment to find how far past 12 in both directions to get the date to change.

Follow this link and find the nearest to you:
http://www.baume-et-mercier.com/retailers?type=2
There is no other way to find the pieces you want.
Rate me please.

mcdevito75 here, Best bet, look for a small watch repair shop in your area for a new strap.

mcdevito75 here, Yes and No, While any sharp, sudden, or very hard motion of your hand, wrist or arm can hurt a watch, it seldom does, most of the time you"d have to actually bang the watch against a hard surface, Wall, Floor etc to effct the movement, and usually you just scratch the crystal or caseing. .

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to B&M watch manuals.Rate me, please

Does the dial have "Automatic" wtitten on it". If it does then it's a mechanical movement. If it has "Quartz" then it requires a battery. If the watch isn't running perhaps it just needs a battery. This may also explain why the pushers aren't working. If it's mechanical the watch needs to be wound before the pushers will work. What are the markings on the subdial.

379

Please give me a better idea about what is happening.Does the crown screw down at all? email me [email protected]

The hands must be adjusted.fairly easy fix