Installation manual for marksman x6 remote start

Hello, Rob -
First, I recommend you read the information from Ready Remote here: http://www.readyremote.com/

That web page gives links to tutorial installation videos.

I only found online installation manuals for the following AutoCommand Remote Car Starters:

Models 20024, 20724, 20924:
http://www.readyremote.com/pdf/manuals/20024-28v3-1.pdf

Models 20036, 20027, 20038:
http://www.readyremote.com/pdf/manuals/20036-37-38v92.pdf

You may wish to telephone DesignTech International and ask about the availability of installation instructions for Model 20034. This is the toll free phone number: 800-337-4468.

On some remote starters, there is print on the back of the remote starter itself. It is hard to see with it being black raised text on a black box. If not there, sorry DEI Viper is pretty protective on their installation manuals.

go to www. fitnessmanualsonline.com and download for freeGod bless youcreateLink

sometimes there is a switch near the battery or on the bottom of the remotes to disable it. otherwise some projectors have an option in the menu that you need to turn on to be able to use the remote, it should be under IR options

A tach MUST be connected for manual transmission installation. Start there.

1) If you have sucessfully released the safety lever, grab the textured black grip of the cocking mechanism and pull it back until it locks into place.
2) In a safe manner, hold the pistol by the handle with your left hand and carefully grab the black plastic sighting mechanism at the end of the barrel with your right hand and pul this black tip end of the pistol downward. You should find that the other end (which lies more mid-barrel) will pivot upwards, giving you access to the loading tube.

Go here, 2nd or 3rd post down, you will need to register, then you can download the manual...both are free.

Good grief.........where is the installation guide.........on viper web sight the guide is merely how to program the damn remote.....all 40 pages..

It can be installed, but is not recommended. If the car was left in gear and the auto start activated the car will lurch forward. A friend of mine, who is an installer, had his WRX jump a curb in a parking lot in land in a ditch. BTW, he "never left his car in gear". It only takes once.

I have a Marksman H50T13 remote starter and had to change the batteries in my remote. I also recently replaced the car battery. My remotes will work now, but my car starts on its own without touching the remotes.