My tv is not working turned it off in the morning came home will not turn back on the light on the tv just blinks red the remote will not work also please advice me what to do. thank you [email protected] .com
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
This worked for me, but I have a Comcast Motorola DVD-R: These are the codes for your SONY SA-CT60 Audio Device. Follow the instructions below to program your remote. Most likely code: 30158 Others to try: 31758, 31759
To program your Comcast remote:
Turn on the TV or other device that you would like to program.
Press the TV button on your remote control. NOTE: If you would like to program your remote control to work with a DVD Player,
VCR or Audio device press the AUX button.
Press and hold Setup until the red light blinks twice, then release Setup.
Enter the first code for your device listed above. If you perform this procedure
correctly, the red light will blink twice. NOTE: If you enter an invalid code, the red light will display one long blink and
exit the programming mode. Repeat steps 2 to 4 with a valid code.
Aim the remote control at your device and press Power once (press the Play key for
devices that don't have a POWER button). If the TV turns off, make sure that the
VOL+/- and Mute buttons also work. If so, you're all set!
If not, repeat these steps using the next manufacturer's code (you may need to try
several codes to find the one that works).
then 0178 is not the right code if the light blinks twice try code search turn the tv on press tv then hold setup till it blinks twice then point the remote at the tv then press the power button repeatedly till the tv turns off then press the tv button again
Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice.
Press tv on your Sky remote control again.
Key in the code 0157. The light on the Sky
remote control blinks twice. If the light blinks once only, recheck the
code you entered and start again at Step 1.
Press the standby button on your Sky remote control. If your TV switches off, press select. The light on the Sky remote control blinks twice (code stored). If your TV does not switch off, press tv, then press the standby button. Repeat this (press tv, then standby) until your TV turns off, then press select (stores code).
Did anyone find out the solution for this??????? I have the exact same problem with my LG 32 LCD. I only had it for a year and a half, and the green light blinks a few times and it shows no picture. Not even a red light when the tv is off. The same thing happened a couple weeks ago and by some miracle it started working again.